INSTALL INSTRUCTIONS C-TCB-10
1996-2006 FORD TAURUS
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Ratcheting Wrench
3/8” Standard Socket Set
3/8” Metric Socket Set
Powered drill w/ drill bit set
Standard Open-end wrench set
HARDWARE:
QTY DESCRIPTION
PART #
1
1
1
1
1
2
1
2
4
1
5
2
2
1
Pole support assembly
Telescoping pole
Under floor plate
Lateral support brace
Side support brace
¼-20 Nylock nut
5/16-18 Nylock nut
3/8-16 Nylock nut
¼” Flat washer
5/16” Flat washer
3/8” Flat washer
¼-20 x ¾” Hex head bolt
3/8-16 x ¾” Hex head bolt
3/8-16 x 1 ¼” Hex head bolt
CM93071-10
CM93072-1
CM93132
CM93148
CM93149
GSM30016
GSM30017
GSM30018
GSM31005
GSM31006
GSM31007
GSM33001
GSM33027
GSM33029
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. Remove front passenger seat base trim.
INSTALLATION:
1. MOUNT POLE SUPPORT ASSEMBLY:
• Align pole support assembly’s slotted hole with similar slot on seat base and loosely
attach using 3/8-16 x ¾” bolt, washer and nut.
• Loosely attach smaller slot on assembly to seat base using ¼-20 x ¾”
• Repeat these processes attaching the side support brace to passenger seat base.
• Now loosely attach the side support brace and lateral (forward) support base to pole
assembly using 5/16” Nylock nut.
|
Graham Field Mobility Aid 716070A User Manual
Haier Air Conditioner AS072ADAAA User Manual
Hamilton Beach Juicer 840148101 User Manual
Harbor Freight Tools Automobile Parts 94344 User Manual
Honeywell Door RPW311A User Manual
HP Hewlett Packard Computer Drive 460i User Manual
HP Hewlett Packard Network Card D7522A User Manual
HP Hewlett Packard TV Antenna HP 3550 User Manual
IBM Network Card Magstar 3494 User Manual
Ice O Matic Ice Maker ICE0320A3 W3 User Manual