|
USERS’ GUIDE
Thanks for purchasing Haier mobile phones, which are a combination of the essence of
high technologies, stylish designs and a plenty of functions. They are expected to bring
endless funs to your life.
Before the use of Haier mobile phones, please read this users' guide and keep it
carefully for further reference.
This guide serves as an operation guide instead of a quality guarantee. Haier Group
Company of Qingdao reserves all the rights to interpret typing errors in this guide,
inconsistency with the latest materials and upgrading of soft wares and make changes at any
time. Such changes will directly be edited into the new edition of users' guide without further
notice. This users' guide is edited and printed by Haier Group Company of Qingdao.
All rights reserved!
To be held responsible for reprint!
Attention
There are no user serviceable
parts inside this product. If this
product appears to be broken,
call qualified service personnel
and send this product to the
appointed mainantenance service
center.
Do not attempt to disassemble or
repair this product as it may result
in electric shock or unrecoverable
damage to the product itself.
Keep this product out of reach of
small children.
Store this product in its protective
case in a cool dry place.
Dispose of used batteries; please
connect your local waste disposal
centers. Do not throw the battery
near fire source in order to avoid
explode.
Fast guides for N60 Mobile phone
* Enter main menu
List and User-disk.
* Basic Operations
1. In idle mode press left soft key to access
main menu.
2. In the main menu, press up/ down/ left/ right
of navigation key to select menu list.
3. In the main menu, press left soft key to
access the selected menu.
Turn on/ off: long press power/ hang up key
Dial call: input phone number and then dial
End a call: press power/ hang up key
Answer a call: press calling key/ left softkey
Adjust volume: press MODE/MENU key of the
phone left side
4. In the main menu, press the right soft key to
switch display mode of menus.
Return to main menu/ idle screen: press HOME
key
5. Press OK to access the selected menu in the
main menu.
6. In the main menu, press HOME key to return
to the idle screen.
7. Press and hold power/ hang up key to turn off
the phone.
* Left and right soft key perform each function
indicated by labels at the bottom corners show
the current soft key functions.
Show/conceal audio player: press MP3 key
Erase/erase all/ return to the previous: Press
CLR
Speed dial/select option function of list: you can
press and hold any of the keys from 1 to 9 to
quickly make a phone call from the menu list.
Notice: in DC mode, press CLR key doesn’t exit
this mode.
* Direction for use the rotary screen
When your phone’s flip is open, the flip revolved
90° along the clockwise or revolves 90° or 180°
* In the idle mode, double-press this screen can
access to shortcut option screen. In there
including: Edit SMS, Dictionary, Email, NotePad, along the counter clockwise, when revolve to
Video play list, Call Forward, Recorder, Photo the180° position, then close the flip, the phone
enter PDA operation mode.
* Directions for use touch-pen
The touch-pen of mobile phone can help you
operate the mobile phone better.
is not service of guarantee of repair.
The correct method of installs or take out
battery
Installing the battery
The touch-pen is a perfume pen, before use it
inject the selected perfume in the special cylinder
of the touch-pen.
Notice: please control the speed and
quantity during injecting.
* Correct using the MMC/SC card
Use the MMC/SD card and thick battery in
this phone. The phone indicates the loading
is successfully established, and the SD icon
Turn the phone upside down and then hold
the phone by the left hand. Aim the
protruding part at the bottom of the battery
at the groove of phone, and then press the
top part of the battery lightly until you hear a
click. (As shown FIG 1)
Taking out the battery
Turn the phone upside down and then hold
the phone by the left hand. Push up the latch
on top right corner of the screen turns yellow. at the top of the battery by thumb of right
If you want to take off the MMC/SD card,
first of all, you must click the SD icon to
uninstall it and then to take off this card.
Notice: to take off /on the MMC/ SD card
unlawfully or take off the card in service may
be cause irremediable defect. Please use it
correctly acceding to the operation method.
(If the card is damaged irremediably
because of take off/on card unlawfully, there
hand to uplift the battery and separate with
the main machine, and then take out the
battery. (As shown Fig 2)
Latch
Battery
Protruding part
Groove
Notice: If according to this step operation
cannot cause the contact of phone to
destroy and is unable to use. To install and
take out the battery, please accord to correct
method above.
directly.
Ⅰ introduction to your phone
1.1 Keypad
Press left key: enter ‘Haier world, Monternet
and Haier’ option screen directly.
Press right key: enter ‘SMS’ menu directly.
OK key
With this key you can select or enter the
option at flashing cursor location.
In idle mode: press this key to access main
menu screen.
Left soft key
Press this key to access main menu screen.
Right soft key
Press the key in idle mode to enter profile
mode directly.
HONE key
Power/hang up key
The red key on top right corner of the
keypad is power key. Press and hold the key
can switch on/off the mobile phone.
Pressing the key can end a call during a call
or reject to answer a call. Pressing the key in
the profile menu can save set return to the
idle mode.
Call key
The green key on top left corner of the
keypad is call key. You can dial or answer a
call with the key.
Press the key in idle mode can enter
‘outgoing call list’ option.
Up/down/left/right key
The navigation keys can control the cursor
directions.
In main display, press the key to return to
idle mode; during running press the key
continuously to return to the main display.
MP3 key
Press this key to show or conceal audio player
directly.
In idle mode:
Press up key: enter ‘call list’ menu directly.
Press down key: enter phonebook menu
Touch-pen
Camera key
Right side key 2
Right side key 3
Left soft key
Up key
Right soft key
MP3
Right key
Down key
Power/
HOME key
OK/ Middle key
Hang up
CLR key
Keypad
MODE key
MENU key
Left key
Call key
CLR key
In the edit box press the key to conversion
among input modes.
# Key
In idle mode, you can input number first, and
then press briefly the key input ‘#’, press and
hold this key to activity ‘meeting mode’
feature. Input number first during dialing,
and then press and hold # key to input ‘P’.
In the edit box press this key to access
corresponding punctuation symbol.
Press the key to erase/ erases all text in edit
mode; press the key to return to previous
menu in no-edit mode.
Number key 0-9
You can press briefly the number keys 0-9
to enter the phone number option menu and
show correspond number; press and hold
number 1 to access the ‘voice box’ and
press and hold number 2,4,5,7,8 to access
speed dial or 1-touch dial key (need setting),
press and hold 0 to enter ‘phone set’ option,
and hold press 3,6,9 to asked you whether
active the ‘Call Forward’ feature respectively.
In the option list press and hold the number
keys 1-9 to select corresponding option feature.
Key
MODE key
This key on the left side of the phone body
press the key can increase volume.
In the ‘camera’ or ‘video’ mode, press this
key to switch among camera/ picture/ video/
movie.
Press briefly the
Key in idle mode to
MENU key
enter the phone number option menu and
show * in the input box; press and hold the
key can enter the phone number option
menu and show +/W. (The first show +, and
then show W)
This key on the left side of the phone body,
press the key can decrease volume.
In the ‘camera’ or ‘video’ mode, press the
key to select desired option.
Camera key
1. In idle screen, press left soft key (or use the
touch-pen to click the ‘menu’ in the
indication area) to access the main display,;
press the right soft key in idle screen ( or
use the touch-pen to click the ‘profile icon’ in
the soft key indication area) to enter the
profile mode.
This key on the right side of the phone body,
press and hold the key in idle mode to
activity camera/ video feature.
In the ‘camera’ or ‘video’ mode press the key
to shoot picture.
Right side key 2
On the right side of the body is side key 2, in
camera mode, when you browse display
press the to zoom in focus; in camera and
video mode, right shift the cursor. When you
brown the picture screen press the key to
switch to the next picture; in movies brown
screen press the key to switch to the next
movies screen.
2. Main display: the five icons in last right
side of the main display screen indicates
five classes as follow: setting class,
communication platform, multimedia class,
tool class and fun class.
3. The quick feature columns icon on the
top of the screen indicator as follow
from left to right: network signal, dial call,
SMS, MMS, call list MP3, memory,
HOME button as well as battery power
level.
4. In any display, may use the touch-pen
to click the quick feature icon or
indication massage box or menu. (See
the clicked icon whether is availability or
not.)
Right side key 3
Right side key 3 on the right side of phone
can zoon out focus in camera mode, in the
camera and video display screen, press the
key to move left the cursor; in the picture
view display, press the key to switch to
previous video.
1.2 Idle and main displays
5. MMC/SD card: click the SD icon in
quick feature columns to enter MMC/SD
card option screen to view/ uninstall it.
1.3 Using the power
3) Charging the battery
Attach the charger to the phone
Plug the joint of the charger into the
accessory port of the phone.
Warning: You must put the phone at the
draught of temperature +5℃-+40℃ when
charging, and must use the Haier batteries
and charger provide by the provider. It will
arise danger when you use unconfirmed
charger and it will violate certification and
guarantee items.
The battery level indicating bars start
varying, indicating that the battery is being
charged. The display lamp of charging
changes red.
When the lamp of charging changes green,
the battery icon is full when the battery is
fully charged.
Remove the charger; Plug the transformer
unit into an easily accessible AC power
socket.
You can use the USB to charge, insert the
USB prompt ‘whether use the USB’ select
‘no-use’ to charge, if you select ‘using’ it will
indicate the USB used by way of memory.
Notice: 1. Press and hold the buttons of both
sides of the charger after the charging to
plug out the charger.
1) Using the battery
Phone’s stand-by time and calling time
provide by the provider, it is base on the
good operational environment. In practical
application, the battery’ working time has
change along with the different of the
network condition, work environment and
using method.
2) Charge Indicator
In main display, the battery power level
showed on top right corner, though this icon
to know the surplus.
2. We suggest you to charge the battery fully
when you use the phone for the first time.
3. Do not pull out the plug of the charger
during the charging to avoid harming of the
phone and charger.
the main machine, and then take out the
battery. (As shown Fig 2)
4. You must put the phone at the draught of
temperature +5℃-+40℃ when charging,
and must use the charger offered by the
provider. It will arise danger when you use
unconfirmed charger and it will violate
certification and guarantee items.
5. Vibrate feature will is invalidate.
4. Installing and taking out the battery
Installing the battery
Turn the phone upside down and then hold
the phone by the left hand. Aim the
protruding part at the bottom of the battery
at the groove of phone, and then press the
top part of the battery lightly until you hear a
click. (As shown FIG 1)
Latch
Battery
Groove
1.4 Connecting network
1). SIM card
Protruding part
Your provider provides Subscriber Identity
Module (SIM) card for your phone, contains
your phone number, service details, and
phonebook/message information. Make
sure that you have inserted a valid SIM card
before use the phone; otherwise, you cannot
use the feature in the SIM card.
Any related information with establishment
network connection recorded in card, and
record phone name, number and message
in the SIM card also. You can insert the SIM
card into any GSM phone to use (a new
Taking out the battery
Turn the phone upside down and then hold
the phone by the left hand. Push up the latch
at the top of the battery by thumb of right
hand to uplift the battery and separate with
phone can recognize automatically.
you can use PIN (Personal Identification
Number) to protect your SIM card form
unauthorized use. Once the PIN is activated,
you will be required to enter the PIN code at
the time your phone is turned on. You can
disarm the protect code, if so, the SIM will
be not prevent random use.
Press and hold power/ hang up key to turn
on your phone and press the left soft key (or
use touch-pen to click the soft key) to
confirm. If you enter a wrong PIN code three
times, the SIM card will be locked, and need
input PUK code.
In order to prevent loss and damage
information of in the card, should avoid
touching the metal plane region, Avoid
exposing your SIM card to electricity,
magnetism. The card damaged once, the
user will not be able to enter the network.
Warning: Turn off the phone when you take
out the SIM card. Forbids absolutely to
insert or to take out the card while the phone
connected the external power.
2). Insert SIM card
Before remove or insert the SIM card please
take out it carefully. Turn off your phone and
then remove battery as well as other
external power. Slide the SIM card under
two lugs with the metal contacts facing
downward, push the SIM card so that it
clicks into place. If user wants to take out it,
please turn the phone off firstly then take out
phone’s battery and last take out SIM card.
3). Insert the SIM card
Pay special attention to: there is a stander
PIN cord (4 to 8 digits) of your SIM card is
pre-configured and communicated to you by
your network provider. You can personalize
the PIN code.
4) Network Connection
If a right code is entered your phone will
start searching for the Network Settings.
5) Switch on/ off
In order to prevent random use your phone,
Press and hold power/hang up key to switch
on/off the phone. If the PIN is activated,
when you switch on the phone, you may be
prompted to enter the PIN code.
code. If so, please contacting your SIM card
supplier.
6) Dial call
a. Input the PIN code
When the sign of the Network provider is
displayed screen, your phone enter idle
display to dial and answer call.
In quick feature display from the left first icon
is signal intensity. All mobile phones may be
obstruction subject to interference, which
could affect the performance of the mobile
phone. So moving within small range can
advance the signal strength.
You can use PIN to protect your SIM card
form unauthorized use. Once the PIN is
activated, you will be required to enter the
PIN code at the time your phone is turned
on.
For the sake of confidentiality, the code is
displayed as a group of “*” in the screen.
Press the left soft key (or to click the soft key
with touch-pen) to confirm, after a short time, Make a call in idle mode have dual mode
if a right code is entered your phone will start
searching for the Network Settings. Once
the network name is shown on the screen,
you can dial or answer a call. If no network
name is shown on the screen, need you to
register again.
If you make a wrong input, you can press
CLR to delete the wrong numbers. If you
enter a wrong PIN code three times, the SIM
card will be locked and asked you input PUK
such as: direct dialing, call from the
phonebook, call from call list, call form SMS
and MMS, speed dial, call from SIM card. (if
you have set PIN code must input right
secret code to dial a call)
In any country where the digital GSM
network is used, you can make emergency
calls when your mobile phone in the
coverage network area (you can get it by
means of inspecting the network signal
indicator on the left top corner of the screen.)
and you can make emergency calls without
SIM card.
112 is the standard GSM emergency
number, which can be used by any GSM
network in the world.
called time and caller’s phone number and
name will appear on this screen.
Ⅱ Call
2.1 Dial call
Pressing right key, power/hang up (or click
‘hang-up’ button by touch-pen) to end a call.
The screen will show how much time you
have spent on a last call.
When your service provider’s icon display
the screen, to wit enter idle mode and you
can make or answer a call. The signal
indicator in the top left corners of the screen
Indicates strength of signal being received.
There are 4 bars is the most signal indicator.
All mobile phones may be obstruction
subject to interference, which could affect
the performance of the mobile phone. So
moving within small range can advance the
signal strength.
2.1.1.2 Dial extensions of fixed telephone
Some extensions of fixed telephone cannot
be got through directly. So you need to get
through the leader and then the extension
number, if you insert ‘w’ ‘p’ between two
numbers while inputting them the handset
will finish dialing the leader and
automatically dialing the extension number.
The method of inputting ‘w’ ‘p’ is as follows:
input the call time and press # key (‘w’ will
be displayed on the screen at this moment).
Then press long #(‘p’ will be displayed on
the screen).
Make a call in idle mode have dual mode as
direct dialing and call from the phonebook.
2.1.1 Direct dialing
2.1.1.1Dialing domestic telephone
The best simple means is enter phone
number (make a domestic telephone, enter
area code) then press call key (or use
touch-up to click the call key button) to make
a call. The display screen appears ‘linking’
during dial a number, when calling there is
You can dial main and extension number
directly by input ‘w’. Feature of ‘w’ is
shortening processing of call. Once input
‘number’ + ’w’ (delay time) + ‘operating
number’+ ‘w’ (delay time)……, and then
press call key (or click ‘call key’ icon by
touch-pen) to dial. Method of input ‘w’ as
follow: press and hold * key while you input
(first show ‘+’ and then show ‘w’ in ‘the
number display screen’.
2.1.1.4 Make an international call
Make an international call
If you make an international call , you only
enter ‘+’ (double press* key until
“ ﹢ ”appears on the screen), then enter
country code and phone number.
For example: extensions fixed phone can be
got through directly, input follow number to
dial: main phone number ‘P’ extension
phone number, then press call key (or click
the call key icon by touch-pen), this phone
will dial extensions automatically.
For example, if you make a Gallo call, you
can double press * key (appears on ‘+’) 33
(France code) then input district code and
telephone number.
2.1.2 Dial from the phonebook
Press down navigation key in idle mode to
access ‘phonebook’ menu and then select
desired number to select ‘call’ menu in soft
key indicator, or after select this recorded to
dial it directly.
Or enter ‘call’ dialing screen to select
‘phonebook’ option in soft key indicator so
that enter phonebook. To select desired
number, when the number displayed in
number show column press call key (or click
call key icon with touch-pen) to dial this
number.
2.1.1.3 Dial IP call
The first, enter ‘phonebook’ option to set IP
number. Afterward, enter ‘call list’ option to
input toll number, then select ‘IP call’ option
in ‘menu’ of soft key indicator, insert IP
number automatically in front of phone
number and then dial it.
If you don’t set IP number in the phonebook,
so then your phone will indicates ‘no have IP
number’ when you input toll number to dial
IP number.
2.1.3 dial from call list
Enter ‘MMS’ option and select a downloaded
successfully MMS to dial sender number
directly or select call option in soft key
indicator to dial this sender.
In idle mode press the call key to access
‘outgoing list’ of call list, and select a
recorded number to dial it directly by press
call key. Or select ‘call’ menu in soft key
indicator to dial this recorded number.
Press up navigation key to access ‘call list’
option and then select a recorded number to
dial it directly by press call key. Or select
‘call’ menu in the soft key indicator to dial it.
Or you can enter Call option screen or select
‘call list’ option of menu in the soft key
indicator to access the call list option. When
you select a recorded number to dial directly
by press call key. Or select ‘call’ option
menu in the soft key indicator to dial it.
2.1.4 dial from SMS
2.1.6 Fast dial
Fast dial is also called contract number dial.
You can separately set the 5 digital keys
(2,4,5,7,8).
In the idle screen, long press the digital keys
(2,4,5,7,8) that have been set to be dialed
singlely, you will find the telephone number
is dialed automatically relevant to the setting.
If what you select is not set to be dialed
single, the mobile phone will remind you that
‘single key dial is not set’ and point out
whether you need to set single is started,
you need to first input the password and
then to set the single key dial.
Press right navigation key in idle mode to
access SMS option, and then select a SMS
massage to dial sender’s number directly by
press call key or select ‘call’ option in soft
key indicator to dial sender.
2.1.7 dial number in SIM card
In idle screen, press digital keys and * key,
then press call key (or click call key icon by
touch-pen) to dial number in SIM card, that
is to say, the number stored in
2.1.5 dial from MMS
corresponding station of SIM card will
display automatically.
2.2 Access failure
comes, the display screen don’t shown
caller’s information, only show incoming
flash).
When the phone cannot put through, for
instance, the opposite party ‘line is busy, he
refuse to answer the phone, he is not in the
service district or the phone is switch off’,
the phone will remind you that ‘the phone
cannot put through’. At this very moment, if
you have set redial automatically, the mobile
phone will automatically redial the telephone
you dialed just now until it doesn’t get
through after dialing for ten times or you
initiatively cancel the dial.
When the mobile phone rings and it is
informed from the screen that there is a new
call, press call key, power/ hang up key (or
click the answer in soft key indicator with
touch-pen) to answer the phone.
When the talk ends, press right, power/
hang up key (or click the refuce in soft key
indicator with touch-pen) to hang up.
If you are answering the phone, your mobile
phone will inform you of the new call with
short “du du”. At this moment, you can press
call key, left soft key (or click the answer in
soft key indicator with touch-pen) to answer
the new call, while the formerly answered
telephone will get into the keep-talking state.
The formerly answered call will been hang
up.
2.3 Answer the Call
2.3.1 Answer a Call
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute (If your phone no have shown
incoming call feature, when a new call
If you are answering the two phones, your
mobile phone will inform you of the new call
with short “du du”. You can press call key,
left soft key (or click the answer in soft key
indicator with touch-pen) to answer the new
call, the formerly answered call will been
hang up. The formerly answered telephone
will get into the keep-talking state.
If you want to refuse a call you can press
right soft key, power/hang up key (or click
‘refuse’ or ‘busy’ icon by touch-pen) to
refuse new call.
opposite sound come out from reproducer
but no incoming from headphones.
2.3.3 Answer incoming with earphone
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute. If you connect the earphone with
the phone, answer and hang up the
incoming call with press the button of
earphone. Press the button of earphone
again to end the call.
2.3.4 Close the show incoming feature
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute.
2.3.2 Answer call with freehand
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, and also, it
will inform you of the new call according to
your setting----vibration/ring/vibration plus
ring/ mute (If your phone no have shown
incoming call feature, when a new call
comes, the display screen don’t shown
caller’s information, only show incoming
flash). When a new call comes, the mobile
phone will show the sign of the new call,
click the signal with touch-pen to answer it,
namely, your phone was in freehand mode,
2.3.5 Cancel incoming
When a new call comes, the mobile phone
will show the sign of the new call and the
telephone number or the name, it will talk
you according to vibration/ ring/ vibration
plus ring/ mute by your set.
When a new call is coming, press right soft
key or power/hang up key (or click cancel or
busy button by touch-pen) refuse the new
incoming call.
According to your set or the service provided
by the network, the call maybe alters to
other number or in busy state.
leader’s number.
2.4.2 Adjust Volume
You can press MODE, MENU key to
increase or decreased the volume of the
phone while talking.
2.4.3 Option
The functions can be activated by pressing
option. There are five contents in the menu:
preserve the talk, turn on/off the hand free,
telephone list, message, mute and new
calls.
2.4 In the process of calling
In the process of talking, the following
functions can be fulfilled: dial extensions,
adjust the volume, preserve the talk, turn
on/off the hand free, call list, messages,
silencing and new calls.
Preserve the talk Preserve the present talk
(relating to SIM card), thus, neither of the
sides will hear the voice of each other.
Change preserves the talk into regain the
talk, you can return to the normal talking.
Hand-free The sound of both sides will be
sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
2.4.1 Dialing Extensions
After hearing the notice sound of the
opposite telephone, dial the extension
number directly which will be displayed on
the screen; while finish dialing the extension, return to the normal talk(when the mobile
press right soft key (or click return in soft key
area by the touch-pen) to display the
phone is connected to the other fittings,
such as earphone, the loudhailer maybe
stop working);
2.4.6 Answer the New Call
Silent Turn off the voice temporarily in
talking then you can hear the opposite party
while he cannot hear you. Thus, it is
convenient for you to talk with others in your
side while talking on the phone. Change the
item into cancel mute, then you can return to
the normal talking
Call list Enter the call list, then you can
search the phone number while talking, the
talking direction and the talking state.
New call Dial the second call (relating to SIM
card).
When answering a new call, the former talk
will be in the preserved state. You can
choose the Holding to activate the former
talk while the new call will get into the
preserved state (relating to SIM card).
2.4.7 Dial the Second Call
You can dial the second call in the process
of dialing the first. The concrete method is to
select new call to show the new window for
dialing, or press the digital key directly. You
can also press the call key to dial the new
call (click the call by touch pen).
2.4.4 Hang Up
When getting through the line, the number in
process of talking will be displayed in the
bottom line. You can press Up/Down (or
click it by the touch pen) to switch the talk.
2.4.8 Answer two calls simultaneously
When getting through the two lines, the
number in process of talking will be
displayed in the bottom line, while the other
will get into the preserved state. You can
press Up/Down to switch the two talks.
Press right soft key, power/ hang up (or to
press the hang up in the function area to
hang off the phone by the touch pen). After
the phone is hung off, the call time will be
displayed.
2.4.5 New Messages
The mobile phone will inform you of the new
message (SMS or MMS) with notice sound
when you are talking on the phone.
When getting through the second telephone,
you can choose the following functions:
holding, conference call (relating to SIM
card), hand free, mute, telephone list.
Holding Keep the present call(relating to
SIM card), then the both sides can not hear
the voice of each other, then the holding
alters to cancel holding, press it then you
can keep the normal talking.
Mute Turn off the voice in talking temporarily,
and you can hear the opposite party while
he cannot hear you. Thus, it is convenient
for you to talk with others in your side while
talking on the phone. Change the item into
cancel mute, then you can return to the
normal talking.
Telephone list You can get into the
telephone list to search the telephone
numbers, the talking direction and the
talking state in the process of dialing .
2.4.9 Conference call A call conference of
many people can be hole, and a separate
talk with the very attendee pointed can be
run. The concrete number of the attendees
will be supplied by network.
You can hang off all the calls and the call
time will be displayed by press the right soft
key/hang off /(or click the hang off by the
touch pen). If there are missed calls in the
process of talking, it will be informed on the
screen, If new call or new messages (SMS
or MMS) are coming, they will be informed
Conference call A call conference of
many people can be hole, and a separate
talk with the very attendee pointed can be
run. The concrete number of the attendees
will be supplied by network.
Hand-free The sound of both sides will
be sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
return to the normal talk(when the mobile
phone is connected to the other fittings,
such as earphone, the loudhailer maybe
stop working);
by the notice sound.
The following operations
accomplished by option in the process of
conference call; holding, seperarated, hand
free, mute, telephone list, redialing.
Holding Keep the present call (relating to
SIM card), then the both sides can not hear
the voice of each other, then the holding
alters to cancel holding, press it then you
can keep the normal talking.
Separated when the opposite partner is
selected, press the Separated, and then you
can talk with the partner separately, in the
meanwhile, two calls are through. If you
want to back to the conference call, press
conference.
Hand-free The sound of both sides will be
sent to each other by loudhailer, in the
meanwhile the Hand free alters to Cancel
the hand free, then by this item you can
return to the normal talk (when the mobile
phone is connected to the other fittings,
such as earphone, the loudhailer maybe
stop working);
can
be
Mute Turn off the voice in talking temporarily
and so you can hear the opposite party
while he cannot hear you. Thus, it is
convenient for you to talk with others in your
side while talking on the phone. Change the
item into cancel mute, then you can return to
the normal talking process
Telephone list, you can get into the
telephone list to search the telephone
numbers, the calling direction and the calling
state in the process of dialing.
Redial Dial the second number (relating to
SIM card)
Notice; All the imitational equipment are
invalid in the process of talking, and the
sound volume will decrease 50%.
2.4.10Search the telephone list in the
process of talking
If you want to be back, press Home.
Press the direction sign, you will enter the
telephone list.
2.5 change the incoming tone
the phone cannot be used, such as, while
having a call, the customers cannot use the
music player to play the music. And the
phone will inform you)
Press right soft key in the await screen (or
click the sign mode by touch pen) to change
the way of incoming tone.
2.8 checking the IMIE number of the phone
Enter the application of the mobile phone,
you can input the number”* #06*”and the
calling key (or use the touching key to press
the calling key) to get the IMEI number.
2.9 The phone recording
You can touch the key of recording on the
top right in the calling, receiving call and call
duration windows to have phone record. But
the recording can only be done in the
process under calling. The recording files
will be stored in the recording files of the
customer’s resource automatically.
2.6 Emergency Call
In any country where the digital GSM
network is used, you can make emergency
calls when your mobile phone is placed in
the network coverage area (you can get it by
means of inspecting the network signal
intensity bar on the left top corner of the
screen.) and you can make emergency calls
without SIM card.
112 is the standard GSM emergency
number, which can be used by any GSM
network in the world.
2.7 hiding the call
Attention: after opening the function of
recording, the alteration of hand-free
canceling the hand-free cannot be fufilled.
When the customers use the phone to
receive or dial calls, they can press the
HOME key to hide the phone number. It is
convenient for the customers to get other
operations. (Some applications colliding with
the selected number more large and the
bright more light. Press left soft key (or click
‘save’ of in the soft key indicator by
touch-pen) to save your set.
Ⅲ
Operation of menu
1. Setting menu option
1.1 Phone setting
1.1.1 Language setting
1.1.4 Greetings
There are ‘Chinese simple’ and ‘English’
options in language set menu, press OK key
(or click option with touch-pen) to select you
desired language, and then press left soft
(or click ‘save’ in the soft key indicator by the
touch-up) to store, the language will be
changed into the desired language.
1.1.2 Backlight
This function allows you to set the length of
time the backlights in your mobile phone, set
respectively ‘5s, 10s, 15s, 30sand 60s. You
can select according to the need. Press left
soft key (or click save option in soft key
indicator by the touch-pen) to save your set.
When the mobile phone stops working, and
the selected time coming, the backlight will
turn off automatically.
After activate ‘greetings’ option you can
input desired greetings, then press left soft
key (or click ‘save’ icon in indicator by the
touch-pen) to save the greetings. Once
switch on your phone the greetings will be
shown in the screen. If you don’t activate
feature, the greetings won’t be shown when
the power is on.
1.1.5 Auto power on
You can select auto power on option and
input the power on time, then press left soft
(or click save icon in the soft key column by
the touch-pen) to save your set. When your
phone is in turn off state until set time arrive
your phone will automatically power on.
1.1.6 Auto power off
You can select auto power off option and
input the power off time, then press left soft
1.1.3 Brightness
Adjust phone’s brightness in 01-09 ranges,
(or click save icon in the soft key column by
the touch-pen) to save your setting. When
your phone is in power on state until the set
time arrive your phone will automatically
power off.
be back to setting screen, otherwise, you will
be instructed as followed: “too much errors,
try again!”
1.1.10 Reset
When you select this option, you will be
instructed: “Reset?’ When you select
‘confirm’ press OK key (or click ‘OK’ by
touch-pen) the screen instructed ‘Reset
successfully’. Your phone will reset: the
phone set, screen set, sound set, profile set,
as well as SMS firewall and phone firewall
option of in the security menu, reset them to
default.
1.1.7 Input set
There are Pinying, English, 123digits and
stroke input methods in the ‘input set’ menu,
and you can accord your need to select.
Press left soft (or click save icon in the soft
key column by the touch-pen) to save your
setting.
1.1.8 Hotkey
According your need to set each digit as well
as set single dial and quick dial. In idle mode
press and hold digit key will dial phone
number directly or show your setting
information.
1.19 Touch setting
When touch errors appear, you can enter
the touch setting to correct them. Click the
1.2 Sound set
1.2.1 Call ring type
1. Ring volume
Press left/right of navigation key to adjust
ring volume, as well as press left key to
decrease volume and press right key to
increase volume.
2. Ring
Selected the Ring option and press left soft
key (or click save icon in soft key indicator
center of
correctly, then the window will
by touch-pen) to save it. There is ring tone
notifying you when a call coming.
3. Vibrate
Selected the vibrate option and press left
soft key (or click save icon in soft key
indicator by touch-pen) to save it. When a
call is coming, the mobile phone will vibrate.
Otherwise, the phone will be mute.
4. Glint
hasn’t glint feature.
1.2.3 MMS ring
The MMS ring set same as the incoming
ring. But there is difference from: this option
hasn’t glint feature.
1.2.4 Alarm
The alarm ring set same as the incoming
ring. But there is difference from: this option
hasn’t glint feature.
Selected the glint option and press left soft
key (or click save icon in soft key indicator
by touch-pen) to save it. There are three
lights, red, blue and purple. which will notify
you when a call is coming.
1.2.5 Power on ring, Power off ring,
Calendar, Key tone, Connected, Low battery
and Touch pad tone.
When select one option of them and press
left key (or click save icon in soft key area
with touch-pen) to save it. Those
corresponding option can ring; otherwise,
5. Music select
In music select menu press OK key (or click
with touch-pen) to enter ring list option menu, then do not have ring sound.
you can select incoming ring type, as well as
select downloaded ring from ‘ring world’
website.
1.2.2 SMS ring
The SMS ring set is same to the incoming
ring. But there is difference from: this option
1.3 Screen set
1.3.1 Screen theme
Select the ‘screen theme’ option to press OK
key (or click with touch-up), your phone can
bounce out a list for select screen colors,
you can selecting fond color ‘Blue Sea’,
‘Gold Times’, ‘Coffer Aroma’ and ‘Cyan
Fruitage’ and so on.
1.3.2 Wallpaper Select
selected, the selected type will showed in
the idle screen. If you select any one of the
wallpaper, scroll bar, week, the gregoria,
time and Chinese cale options, the selected
option will be shown according, otherwise,
will be not shown.
Select the Wallpaper select option to press
OK key (or click with touch-up) to enter
‘picture list’, and press up /down of
navigation key (or with the touch-pen to roll
up/down the strip) to select picture fond,
when you selected the desired picture, there
are indicator ‘wallpaper setting?’ be showed
you; if you press OK key (or click OK with
touch-pen) to confirm, the wallpaper will
switch to the selected picture; if you press
right key move the cursor to ‘cancel’ option,
and then press OK key (or click ‘cancel’
button with touch-pen), the wallpaper is no
change.
1.4 Call set
1.4.1 Call wait
Using the call wait feature, during calling the
incoming’s showed in the screen.
1.4.1.1 Activate call wait
Press left soft key (click the ‘activate call
wait’ option with touch-pen) to select
‘activate call wait’, and the screen show
‘connecting’ and then the screen will show ‘if
operating successful’.
1.4.1.2 Cancel call wait
1.3.3 Idle screen setting
Press left soft key (click the ‘cancel call wait’
option with touch-pen), to select ‘cancel call
wait’, and the screen show ‘connecting’ and
then the screen will show ‘if operating
successful’.
In idle type options including four types:
digital, analog, monthly view and world time.
You can press up/down key (or click ‘option’
with touch-pen) to select, and press left soft
key (or click ‘save’ with touch-pen) to save
1.4.1.3 Inquire status
Press left soft key (click the ‘inquire status’
option with touch-pen) to select ‘inquire
status’, and the screen show ‘connecting’
and then the screen will show ‘if operating
successful’.
feature to input the new number in input box.
1.4.2.1.2 Inactivate call
Press left soft key (or click this option with
touch-pen) select this option, and the screen
show ‘in connecting’ and then the screen will
show ‘if operating successful’.
1.4.2 Call forward
When activate the ‘call forward’ option you
can select different type of call forward as
well as you can set the forward number.
1.4.2.1 Unconditional
After you activate this option, you can
forward all incoming call to other phone
number.
1.4.2.1.3 Inquire status
Same as inquire call wait status, press left
soft key (or click this option with touch-pen)
to select this option, and the screen will
show ‘connecting’ and then the screen will
show ‘if operating successful’.
1.4.2.2 When no reply
1.4.2.1.1 Activate call
Basic operating of this option same as the
Press left soft key (or click this option with
touch-pen) to select this option you can
enter the screen of input box, and after input
the desired number press left soft key (or
click with touch-pen) to confirm it and the
screen show ‘connecting’ and then the
screen will show ‘if operating successful’.
If you wand to change the forward number,
only need you activate the call forward
‘unconditional’,
please
reference
unconditional option. When you activate this
feature, you must select delay times.
1.4.2.3 When busy
All feature of this option same as the
unconditional feature.
1.4.2.4 When failing to connect
All the operations here are the same to those of
Unconditional.
1.4.2.5 Cancel All Call Forwards
touching pen to click] to able or to disable.
Then the setting will take effect when the
password is input.
1.4.3.1.2 International Calls
Similar to “All Outgoing Calls”
1.4.3.1.3Home Calls Only
Similar to “All Outgoing Calls”
1.4.3.2 Incoming Call Bar
This function is to limit the incoming
calls.
Press the left soft key [or click with the
touching pen the ‘choice’ in the hint area] of
“Cancel all the forwards”, then comes a
message frame saying ‘connecting the
network’; after having connected, another
hint will come out to conform. Once it is
conformed, all forwards are going to be
cancelled, including “Unconditional”, “No
Reply”, “When Busy” and “Not Reachable”.
1.4.3 Call Bar
1.4.3.2.1 All Incoming Call
This function can optionally bar the incoming
or outgoing calls.
Similar to “All Outgoing Calls Bar”
1.4.3.2.2 Roaming Calls
1.4.3.1 Outgoing Call Bar
Dialing Bar can limit the outgoing calls.
1.4.3.1.1 All Outgoing Calls
Press the left soft key [or click with the
touching pen the “Choice”] to choose the
option of “Barring All Outgoing Calls”, and
then there are two choices “Able” and
“Disable”. You can use the Up-and-Down
button [or use the touching pen to click] to
move the focus; then press “OK”[or use the
Similar to “All Outgoing Calls Bar”
1.4.3.3 Cancel Call Bar
The password is needed if you want to
cancel all bars. Once Call Bar is cancelled,
all the settings about outgoing and incoming
calls will be cancelled.
1.4.3.4
Change PIN Bar
Similar to changing the password of
“Security Firewall” in “Security Set”, first you
need to type in the old password, then you
can enter the screen of setting a new
password; then you need to type in the
same password twice to finish changing.
1.4.4 Auto Redial
with touching pen] to choose “Auto Answer”
option, and then press the left soft key [pr
click with touching pen] to save it.
1.4.6 Open Answer
If this function is enabled, a hint will jump out
to the screen to inquire whether to redial
later when there is no reply to your outgoing
call. If you choose “Redial”, it will keep on
redialing for ten times before ending. If you
do not choose “Redial”, the calling is ended.
To enable Auto Redial, you only need to
press “OK”[or click with the touching pen] to
choose “Auto Redial”, and then press the left
soft key [or click with touching pen the
“Save” key] to end your set.
When this feature is enabled, you just need
to open the cell phone to answer any
incoming call. To enable this function, you
just need to press OK [or click with touching
pen] to choose “Open Answer” Option, then
press the left soft key [or click the “Save”
with touching pen] to save it. Then Open
Answer is enabled.
1.4.7Anykey Answer
When this function is enabled, besides the
usual way of answering, it’s also ok to press
keys 1 to 9, *key, or #key. To enable it, you
just need to press OK [or click with touching
pen] to choose “Anykey Answer” option,
then press the left soft key [or click with
touch-pen “Save”] to save it.
1.4.8Time Hint
When this function is enabled, there will
be a hint at the point of 50 seconds in talking.
1.4.5 Auto Answer
When this function is enabled and the
earphone is inserted, the incoming call will
be answered automatically after the call has
lasted for more than 5 seconds (the Auto
Answer Time). Auto Answer is only
applicable to earphone. In setting Auto
Answer, you just need to press “OK”[or click
To enable it, you just need to press OK [or
click with touch-pen] to conform “Time Hint”
option, and then press the left soft key [or
click with touch-pen] to save it.
choose “To Home”; here the user can set as
his wish the home phone number, “Back
Time” and “Mode”. After set, press “Save” to
save the set or press “Cancel” to go back to
the up menu.
1.4.9 Hide Code
When this function is enabled, your cell
phone number will be hidden from the
phone’s screen that you are calling. To
enable it, you just need to press OK [or click
with touch-pen] to choose “Hide Code”
option, and then press the left soft key [or
click with touch-pen] to save it.
Note: This function needs the support
from the network.
1.5 Call Forward
1.5.1.3 Effect
1. After setting “To Home” and “Back
Time” ----give the key of 3 a long
press, then conform to effect “To
Home”.
2. If not yet set “To Home” or “Back
Time”--- give the key of 3 a long
press to conform, and a hint will
appear that the “To Home” or “Back
Time” is not yet enabled, and you
need to enter the Call Forward to
pre-set.
1.5.1 To Home
1.5.1.1 Function Introduction:
If the user has enabled “To Home” at
the present time, all the incoming calls will
be forwarded to the home telephone within
the set “Backtime” in the set “mode”.
1.5.1.2 Set
1.5.1.4 Cancel
Enter “Call Forward” in “Call Set” and
conform “ Cancel All Forwards”
1.5.2 To Company
1.5.2.1 Function Introduction
Enter the Option of Call Forward and
When the user enable “
To
Company” at the present time, all
incoming calls will be forwarded to the
company’s phones within the “effective
time”.
Enter “Call Forward” in “Call Set” and
conform “ Cancel All Forwards”
1.5.3 To Others
1.5.3.1 Function Introduction:
1.5.2.2 Set
When the user enable “ To Others”
at the present time, all incoming calls will
be forwarded to the set phones within the
“effective time”.
After entering “Call Forward” and
choosing “To Company”, the user can set
as his wish “the company number” and
“Effective Time”. Then press “Save” or
“Cancel ” to go to the up menu.
1.5.2.3 Effect
1. After setting “To Company” and
“Time” ----give the key of 6 a long
press, then conform to affect “To
Company”.
1.5.3.2 Set
After entering “Call Forward” and
choosing “To Others”, the user can set as
his wish “the other number” and
“Effective Time”. Then press “Save” or
“Cancel ” to go to the up menu.
1.5.3.3 Effect
2. If not yet set “To Company” or
“Time”---give the number 6 a long
press, after conforming, a hint will
inform you that the “To Company”
and “Time” hasn’t been set, and you
need to enter Call Forward to
pre-set.
1.After setting “To Others” and “Time”
----give the key of 9 a long press, then
conform to affect “To Company”.
2.If not yet set “To Others” or
“Time”---give the number 9 a long press,
after conforming, a hint will inform you
that the “To Others” and “Time” hasn’t
been set, and you need to enter Call
1.5.2.4 Cancel
Forward to pre-set.
1.5.3.4 Cancel
Check”.
After the SIM card is installed correctly,
Enter “Call Forward” in “Call Set” and
conform “ Cancel All Forwards”
Note:
1. All the set numbers must be cell phone
numbers or the telephone numbers with
district number ahead; otherwise the
long press of the key 3,6 or 9 will fail to
effect.
press the left soft key [or click with
touch-pen] to choose “Turn on PIN Check”
or “Turn off PIN Check”, then the user needs
to type in the correct PIN to turn on or off the
PIN Check; but there are only three chances
to check. If a wrong PIN is input three times,
the SIM card will be locked, and the PUK will
be needed. In this case, please contact the
SIM card provider.
2. If this function lap over the
Unconditional, the one set later comes
to effect.
If no SIM card, a hint will inform that
“please check the SIM card!”
3. If the cell phone is turned off, the “Time”
will not be extended after the phone is
turned on.
If the PIN Check is already turned on, the
hint will note you to input the PIN.
1.6.2 Change PIN
4. The changing of “Back Time” will be
invalid after enabling Call Forward.
1.6 Security Set
After the SIM card is correctly installed and
the PIN check is turned on, press the left
soft key [or click with touch-pen] to choose
“Change PIN”. Then the user has to input
the old correct PIN, then the new PIN twice
which must contain 4 to 8 numbers. If a
wrong PIN is input three times, SIM card will
1.6.1PIN Check
When the PIN is off, the first option in the
screen will be “start PIN check”, and when it
on, the first option will be “turn off the PIN
be locked.
1.6.3 Change PIN2
It’s similar to Change PIN, and please refer
want to delete a spam number, you need to
choose the “Delete Option” in the menu.
1.6.4.2 Phone Fire Wall
1.6.4.2.1 Fire Wall Settings
to Change PIN。
“Black List On”: the numbers in the Black
List cannot call in. when the black list is
empty, it’s not allowed to turn on the Black
List.
1.6.4 Fire Wall
After the SIM is changed, all settings in Fire
Wall will be saved.
1.6.4.1 SMS Fire Wall
“White List On”: Only the numbers in the
white list can call in. when the white list is
empty, it’s not allowed to turn on the white
list.
“Off”: to turn off the Fire Wall and any
number can call in.
“Spam Activating”: all SMS from the
numbers on the SMS Spam List will be
directly thrown into the trash. But when the
SMS Spam List is empty, it’s not allowed to
enable “Spam Activating”.
“Mobile phone Only”: all SMS from the
numbers without the beginning as (+86) 13,
will be directly thrown into the trash.
“Off”: Turn off the SMS Fire Wall.
1.6.4.1.2 SMS Spam List
If the user put a mobile phone number in
the SMS Spam List, then all SMS from this
number will be directly thrown into the Trash.
Either input or choose from the “Phone list”
the numbers to add to the Spam List. If you
1.6.4.2.2 The Black List
When entering the black list, the menu
in the soft key area offer three options:
“Phonebook”, “Manual Input” and “Delete”.
The user can either choose from the
phonebook or manually input numbers into
the black list; if the user wants to delete
some numbers, he just needs to press
“Delete” to remove the chosen numbers.
1.6.4.2.3 the White List
is to be input twice to become valid.
When entering the white list, the menu
in the soft key area offers three options:
“Phonebook”, “Manual Input” and “Delete”.
The user can either choose from the
phonebook or manually input numbers into
the white list; if the user wants to delete
some numbers, he just needs to press,
“Delete” to remove the chosen numbers.
1.6.4.3 Security Fire Wall
1.6.5 Reset
When you choose “Reset”, you first need
to input the right reset password, then the
security firewall password (mobile phone
password) will become “0000”, and also all
the settings in the security firewall will be
turned off.
1.66 U-disk Clean Up
When you choose “U-disk Clean Up”,
you will then see “this operation will delete
all the files in the user’s data, please make a
copy first. Continue? ” If you choose OK [or
click with touch-pen], the U-disk Clean Up
will start. Press the key of right to move the
cursor onto the button “Delete”, then press
OK [or click “Cancel” with touch-pen] to turn
off the message frame. The user should
finish the copy (copy all the contents in the
user’s data to a PC). You can’t cancel when
the copying is gong on. After finishing, there
will be a sign to indicate whether the
cleaning up is a success or not.
1.6.4.3.1 Fire Wall Settings
You have to manually input the mobile
phone password to set the password to the
application. The applications that can be
given passwords include “phonebook” ‘SMS’
“Color SMS” “Email” “Call Records” and
“turning-on password ”. The application
password is the mobile phone password.
1.6.4.3.2 Change Password
To change the password, you need to
input the old password correctly (initial
value:0000), then you can be allowed to
input the new password. The new password
Note in particular:
the mobile phone shows; the legal scope is
between 0-23.
Minute--- input the number of minute of the
time the mobile phone shows; the legal
scope is between 0-59.
1. U-disk Cleaning Up will format (empty)
“the user’s data”, so make copies before
cleaning up(copy all the files in the user’s
data to a PC). You are suggested to
carefully use this function.
Second---- input the number of minute of the
2. The format of the mobile phone on a pc, time the mobile phone shows; the legal
or a long time use of the mobile phone as a
memorizer, will both affect the quality of
camera. After the U-disk cleaning up, the
quality of camera can recover. If the user
finds an evident decline in the camera’s
quality, just use this tool to improve it.
1.7 Time
scope is between 0-59.
Year---- input the number of year of the date
the mobile phone shows; the legal scope is
between 1970-2035.
Month---- input the number of month of the
date the mobile phone shows; the legal
scope is between 1-12.
The screen shows two time zones, and the
user can set the time and date, and also
check the time and date throughout the
world. This feature allows the user to get the
accurate time when traveling around the
world. When the user is going to travel
abroad, he can get the time of the
destination and at home as well.
Day---- input the number of day of the date
the mobile phone shows; the legal scope is
between 0-31.
Time zones----press “OK” to pull down the
frame, then use the up-and-down key to
choose [or click with touch-pen the time
zone ] to choose a time zone.
Notes: Only if you press the left sot key [or
click with touch-pen to press “Save”] to save
Hour----input the number of hour of the time
your settings. Other ways such as cutting off
the power, pushing the hanging up key and
home key won’t save it.
Once ” and “Step By Step”.
Use the up-and-down button [or click
with touch-pen] to choose the Mode and
Ring, then press OK [or click with touch-pen]
to conform, then choose “Save” in the menu
of the soft key to start your mode.
[The operations above can all be
conducted by using the touch pen]
1.8.2 Editing the Mode
1.8 Profiles
Profiles are a group of definitions of
the mobile phone’s ring-music, and it is easy
to turn on. The mobile phone offers a set of
modes, including: “normal mode” “outdoor
mode ” “meeting mode” and “silent mode”.
For each mode, this is a set of value. The
user can change and save the mode as he
likes.
The user can choose “Edit” in the
menu to set the parameters under different
modes.
Meanwhile, the user can rename the
mode as he or she likes.
1.8.1Turn on the Mode
1. Call: press up-and-down button [or
click with the touch-pen] to choose “ring of
call”, then press OK [or click with touch-pen]
to enter the editing screen of the ring type of
call. Press up-and-down button [or click with
the touch-pen] to choose “ring volume”,
“way of call” and “music”; use the
left-and-right button [or click with touch-pen]
to adjust and set the right ring volume;
“Ways of Call” consists “Ring” “Vibrate” and
“Glint”; if you choose all of them, then they
When having chosen the appropriate
mode, choose “Save” key in the menu of the
soft key area, now the mobile phone’ ring
music is set by the chosen mode.
“Profiles” has four defaults: “normal
mode” “outdoor mode ” “meeting mode” and
“silent mode”, and it also has four kinds of
rings which include “Consecutive R” “Ring
will work together; As the “Glint” is on, the
glint lights including blue, red and purple will
be shining. The default value of “Glint” is
“on” in all four modes. Choose “music” and
then press OK [or click with touch-pen] to
enter the ring music list. After choosing a
song or music, press left soft key [click with
the touch-pen] to save the setting, or press
the button on the right side to cancel this
setting and return to the up menu.
2. SMS: its way of editing is quite similar
to that of “Ring Style of Call” with only one
difference: the SMS has no “Glint” option.
3. MMS: its way of editing is quite similar
to that of “Ring Style of Call” with only one
difference: the SMS has no “Glint” option.
4. Alarm: its way of editing is quite similar
to that of “Ring Style of Call” with only one
difference: the SMS has no “Glint” option.
5. Power On: press up-and-down button
[or click with touch-pen] to choose “the ring
of power-on”, then press OK[or click with
touch-pen] to conform “the ring of power-on”
and to choose whether to turn it on or off.
6. Turn Off: press up-and-down button [or
click with touch-pen] to choose “the ring of
power-off”, then press OK [or click with
touch-pen] to conform “the ring of power-off”
and to choose whether to turn it on or off.
7. Calendar: press up-and-down button
[or click with touch-pen] to choose
“Calendar”, then press OK[or click with
touch-pen] to conform “Calendar” and to
choose whether to turn it on or off.
8. Key Tone: press up-and-down button
[or click with touch-pen] to choose “Key
Tone”, then press OK[or click with touch-pen]
to conform “Key Tone” and to choose
whether to turn it on or off.
9. Connected: press up-and-down button
[or click with touch-pen] to choose
“Connected”, then press OK[or click with
touch-pen] to conform “Connected” and to
choose whether to turn it on or off.
10. Low Battery: press up-and-down
button [or click with touch-pen] to choose
“Low Battery”, then press OK [or click with
touch-pen] to conform “Low Battery” and to
choose whether to turn it on or off.
11. Touch pad Tone: press up-and-down
button [or click with touch-pen] to choose
“Touch pad Tone”, then press OK [or click
with touch-pen] to conform “Touch pad
Tone” and to choose whether to turn it on or
off.
1.9.2 Network Selection
To select how the mobile phone search
and connect the network, including “auto
search” and “manual search”.
“auto search” :press the left soft key[or
click with touch-pen] to choose “auto
search”, then enter the searching screen
which shows
normal or not.
whether the network is
12. Key Volume: press up-and-down
button [or click with touch-pen] to choose
“Key Volume”, then press OK [or click with
touch-pen] to conform “Key Volume” and to
adjust and choose the right volume.
1.9 Network
“manual search”: press the left soft key[or
click with touch-pen] to choose “manual
search”, then enter the searching screen
which shows the network list available,
through which a mobile phone can be
registered in a normal network.
Examine and adjust the settings of
network
1.9.1 Dial-Up Type
Three default types: “GPRS-WAP”,
“GPRS-NET”, “CSD-WAP”; the user can
also define the dial type.( detail information
about its function in wap browser)
“preferred network”: press the left soft
key[or click with touch-pen] to choose
“preferred network”, then the preferred
network list arrears. The main network of the
user usually top the list with others arranged
in an order.
“preferred added network”: in the screen
of the preferred network, choose the key
“Add” in the menu, then you can see several
networks in the screen, from which you can
choose some to add to your preferred
network list.
“Delete Preferred Network”: in the screen
of the preferred network, you choose
“Delete” in the menu to enter the deleting
screen, then you can choose some to
delete.
saved and those old ones deleted.
When the mobile phone is on but the
password of “Security FireWall” and “Call
Record” in the Security Settings is off, press
the calling key to see the latest outgoing
calls, ( if the password of “Security FireWall”
and “Call Record” in the Security Settings is
on, then the password is needed to check
the call records).
(Operations above can also be practiced
by using touch pen)
2.Communication Menu Application
2.1Call List
In Call List, you can find the missed calls,
outgoing calls and incoming calls with their
exact call time, date and the length of call
time. The Call List has other functions such
as recording the calling, saving numbers
and deleting records, ect. They can be
When the mobile phone is on but the
password of “Security FireWall” and “Call
Record” in the Security Settings is off, press
the up key to see the missed calls in the “call
record”, (if the password of “Security
FireWall” and “Call Record” in the Security
Settings is on, then the password is needed
to check the call records).
Press the left key to enter the main menu
screen, and choose “call record” application,
then press OK to enter it. There are three
types of contents in “Call Record”: missed
calls, outgoing calls and incoming calls.
Users can check the names, numbers, the
divided into three classes:
“Missed”,
“dialed” and “Answered”. Each can save
as many as 20 pieces of records. When the
room for records is full, the new ones will be
time of calls, the dates of calls and the
lengths of calls, of the recent missed
calls(without the call times ), outgoing calls
and incoming calls.
“Send SMS”: to send short messages to the
chosen numbers.
“Set Black”: to put the chosen number into
the black list;
2.1.1
2.1.1.1
Recent Calls
Missed calls
“Set White”: to put the chosen number into
the white list;
In the call list, the missed call is
defaulted. Entering the Missed Call, you can
choose from the menu of the left soft key the
functions to operate the missed calls, such
as “call”, “save”, “IP call”, “send message”,
“set black”, “set white”, “call time” and
“delete”.
“Call Time”: to chick the call time, the total
time of the outgoing calls and incoming
calls;
“Delete”; to delete the useless records.
2.1.1.2 Outgoing Calls
Operations similar to those of Missed Calls
2.1.1.3 Incoming Calls
You can press OK[or double click the
option with the touch-open] to check the
details of the chosen call records, including
the names of the callers (if the phonebook
has the number), the number of the call, the
call time and the date of the call.
Operations similar to those of Missed Calls
2.1.2Delete Records
In the call records, choose the button
“Delete” in the menu, then press the
up-and-down button [or click with touch-pen]
to delete what you want to delete. Then
press OK to choose the record, press left
soft key [or click “Delete” with touch-pen],
the mobile phone will give a hint, then press
the OK [or click “Conform” with touch pen] to
“Call”: to dial the chosen number;
“Save”: to the number into the phonebook;
“IP Call”: to dial the IP number plus chosen
number;
conform; press the button of right to move
the cursor onto “Cancel” then press OK[or
click “Cancel” with touch-pen ] to cancel the
operation.
If you want to delete a certain piece of
record, you can move the cursor on this
record and then choose “Delete” in the
menu. Press OK to delete this record.
2.1.3 Call Time
the records can be grouped, for instance,
friends, schoolmates, SIM and so on. And
they can also be personally grouped. SIM is
very special, because its record can only
consist of one phone number. Its capacity is
determined by itself. The other records
grouped can matched with big-head-photo,
several numbers, birthday, email address,
the address of the company and gender, ect.
2.2.1The introduction to the screen
In the Call Record, choose the “call time”
in the menu, enter the call time screen. Here, 1. Choosing the groups of records on the
you can see the call time of last call, the total
time of outgoing and incoming calls.
You can press left soft key [or click “Return
to Zero”] to reset the call time as zero, then
press the right soft key [or click “Return” with
touch pen] to exit call time.
main screen of phonebook, then you can
see all the records in each group.
2. Clicking with the touch-pen the letters
on the right side of the screen will let the
users find the records, and it works as well
as pressing keys,
2.2 Phonebook
2.2.2Update the records
The functions of Phonebook include “New”,
“Call”, “IP Call”, “Send SMS”, “Send Color
SMS”, “Search”, “Group Setting”, “Status”,
“Copy”, “Delete Record” and “IP Setting”.
In the “phonebook” of this mobile phone, all
Users can choose “New” in the menu of the
soft key, or use the touch-pen to click the
“New” key in the up right part, to enter the
grouping screen of “New with the big-head
photo as the default picture.
Users can change their big-head photos as
their wish and do not forget to conform.
Users can change and update the record
group according to their own demands. To
do that, you just need to move the cursor on
the “Grouping Options”, the press OK [or
click with touch pen] to choose the
appropriate grouping, then press the left soft
key [or click “save” with touch-pen] and it’s
finished. If “SIM Card” is chosen, only one
number can be input and no big-head photo.
In the “New” screen, the number editing
frame can only be input into numbers while
the other frames can be input characters,
special signs and so on. But, there is a limit
to size of every editing frame, for example,
the number editing frame can at most hold
30 numbers.
2.2.3
Alter records
First choose the record then enter the
screen of altering. After altering, the user
must press the left soft key [or click with
touch-pen] to save, then can the contents
be saved. If the user chooses directly
“Cancel”, the altered record will not be
saved.
2.2.4
Look up the record
After entering the phonebook, choose “look
up” of the menu, you will find the different
types as followings:
1.By the initial letter
When the name the users has input are
Chinese characters, the user need only to
input the initial letter of the character. If the
name is English, input the English letter with
the initial letter first and with intervals of
non-English-letter signs to look up. If the
name is a mixture of characters and English
letters, use the first one as the criteria. If the
first one the user inputs is a special sign,
then there will be no result by means of
No matter whether to alter or to open a new
record, the user need to press the left key
[or click with touch pen] to save it after input.
If the user press “Cancel” directly, the
contents won’t be saved.
looking up through initial letter.
Here is an example:
Move the cursor onto the “group” of the
looking up screen, and then press OK to
open the grouping menu, then use the
up-and-down to search the grouping you
want, press Ok and add the grouping to the
grouping place, then choose “look up”, the
screen will show all the records you want.
3.Field Look Up
Fields include: telephone number, name,
sex, birthday, company, tax number,
operation, fax, email, address and remark.
The default field is telephone number.
After choosing the field, input the
corresponding contents, to look up by the
key words can find the records relevant.
Besides, if the name is chosen, the content
editing frame will show “Male” “Female” for
the users to choose.
If the name is “欧阳春雪”, the user should
input “o” to look up; and inputting o and y is
also ok, so is inputting O,C,Y or O,Y,C,X. IF
no letter o, or only O,C, or only O,X, no
result can be found.
When the name is “Jack Smith”, inputting
J or J and S will lead to the name; if only
inputting S, no result.
When the name is “Jack Smith”, inputting
J or J and S will lead to the name; if only
inputting S, no result.
When the user input “Jack 欧 Smith”,
inputting J or J and S can be ok, ,if only
inputting S ,no result.
When the user input “欧 Jack 阳”
Inputting O or inputting O and Y can be ok.
But if only Y, no result
When the name is “%欧阳”, in this case,
this initial way won’t work.
Note: three ways of looking up are
actually the same kind.
2.2.5 Manage By grouping
Choose “Manage by grouping” in the
phonebook and enter the screen of
2.look up by group
management by grouping. Management by
grouping refers to set up different kinds of
records and incoming call rings and
the touch-open] to enter the screen of
grouping icon. If the user wants to choose
an icon, he just need to move the cursor to
the icon, then press OK [or click with the
“phonebook”.
Another
function
of
management by grouping is to add grouping; touch-open].
the user can define 16 groups.
3. Adding grouping
1. Alter grouping ring styles
Choose “grouping management ” in the
phonebook screen, then press the left soft
key[or click with the touch-pen] to enter the
adding grouping screen. Then you need to
input the name of grouping in the “grouping
name” editing frame, then choose grouping
rings and grouping icon. If you want to edit
the added grouping, you just need to choose
“Edit” to enter “delete” in the hint menu to
delete the added grouping.
In altering grouping ring styles, you first
need to choose the groups you are going to
alter, then move the cursor onto “grouping
ring styles”. Then press OK [or click with
touch-pen] and enter “ring style” screen. The
user can choose the ring as his wish.
Another special ring is “default ring” option.
If the user chooses “default ring ”, the
incoming calls will correspond with the rings
in the sound settings.
Note: if you have deleted the added
grouping, the records of this grouping will
return to its default value.
2. Altering Grouping Icon
In altering the grouping icons, you just need
to open what you choose (the way of
opening is the same as altering grouping
ring styles), then move the cursor onto the
grouping icon, then press OK[or click with
2.2.6Call the Present Record
Method1: choose a record with a
number, and then enter the calling screen to
start calling the chosen number. If the
number is a mobile phone’s number, the
big-head photo, name, number will appear;
if the number is a SIM record number, only
appear name and number.
Method2: choose a record with a
number, press OK [or click with touch-pen]
to enter the browsing screen, then enter
calling screen to call the chosen numbers.
When you choose IP call, you call the
IP number and your chosen number
together; you have to set an IP number
before call it. You can find ‘IP set” in the
main menu.
Choose a record with an email address,
press OK [or click with touch-pen]to enter
the present browsing screen, then choose
“send the email” to enter the email editing
screen.
2.2.9 Send a recorded number color to
SMS.
Method1: choose a record with a number,
then choose “send color SMS ”, to enter
email editing screen.
Method2: choose a record with a number,
then press OK [or click with touch pen] to
enter the browsing screen, to enter
email-editing screen.
2.2.7Send a Record to SMS
Method1: choose a recorded number, then
choose “send SMS” in the menu to enter the
SMS editing screen.
Method2: choose a recorded number, press
OK [or click with touch pen] to enter the
browsing screen, then choose “send SMS”
to enter the SMS editing screen.
2.2.10 Copy records
Choose “copy to card” or “copy to mobile
phone” to enter the copying screen. The
specific ways as follows:
Method1: in the browsing screen, choose
“copy to card” or “copy to mobile phone”
then to enter the copying screen.
Method2: in the browsing screen, choose
“copy to card” or “copy to mobile phone”
2.2.8Send a record to email
then to enter the copying screen.
Note: the records in the mobile phone can
only be copied into SIM card; records in
SIMcard can only be copied into mobile
phone.
this record to Mobil phone number, some
files will be lost. Because the mobile
phone record can save a lot of information,
and you must be careful!
2.3 the e-mail
2.3.1 the setting of the account
2.2.11 Deleting Records
1. You can use the account key in the
menu of the soft key to enter the
account list screen (the list is empty
when you first enter)
2. You can use the new key in the menu to
enter the new creating account screen.
It is empty when you first enter.
Pressing the left soft key(or use the
touching pen to touch the new
key)enter the new creation screen. After
inputting the correct the content, you
can use the left soft key (or touch the
save) to store the account.
You can use the grouping deleting way to
delete records. You just need to choose the
records, and then choose “delete” in the
menu to enter the deleting screen. The
specific ways as follows:
Method1: in the browsing screen, choose
“delete”.
Method2: choose “delete ” in the main
menu, then choose the records, then
press the left key [or click with touch-pen]
to delete.
Method3: click the “delete” key in the right
up part. You just need to move the cursor
onto the records, and then click the key
with touch-pen to delete.
Warning: if you change a mobile phone
number into a SIM card, and then change
2.3.2
Deleting the account
You can select the account on the account
list and press the delete key. The mobile
phone will inform you with “deleting?” then
you identify the account is deleted.
2.3.3 Setting the default account
You can press setting default key in the
menu and choose an account on the
account list. Then the account is set as
default setting.
2.3.6 Writing and sending mails
1. You can enter the writing window by
selecting the writing e-mail in the menu
of the soft key. You can also use the
touching pen to touch the writing key to
enter it.
2.3.4
Modifying the account
2. After inputting the address of the
receiver, subject and the content, you
can send the e-mail. It is not necessary
to input the subject and the content, but
you must input the receiver’s address.
3. Selecting the receiver key on the new
e-mail writing window, the address is
activated to select the receiver.
4. selecting save in the menu of the soft
key , the writing e-mail can be stored.
5. entering the additive list after selecting
additive in the menu, you can press the
additive key to choose which you want.
Then the additive is appended by
selecting the identification.
If you want to enter the editing modifying
window, you can choose an account on the
list, then press the OK (or use the touching
pen to touch the account)
2.3.5
1.
the setting key in the menu of the soft key,
you can press the rule key to the rule list.
2.there are two default setting rules in the
list. You can create the new one by pressing
the new creation key in the menu of the soft
key.
The regulations of the mails
Entering the setting window by using
3. After
choosing
the
appropriate
conditions and the operations of rules.
You can input the rule name and set up
a new rule.
2.3.7 receiving the mail
1. choosing the default setting account in
the list, you select the receive in the
menu of the soft key. then all the
e-mails of the account will be received
normally.
of finding the result. The list of e-mail will
show the found e-mail.
2.3.10
deleting the e-mail
1. using the touching pen to touch the
quick “delete” icon on the main screen of the
e-mail, you will be informed whether delete
the e-mail at present or not.
2. there are several accounts in the list. If
you select receive all , the new mails of
these accounts will be received.
2.3.8
reading the mails
2. on the main screen of the e-mail, you
can choose the “delete” in the “menu” in the
warning area to enter into the deleting
screen. Then you can delete several e-mails
at the same time or them all.
1. the mails can be read by pressing OK
key at any mail box(or be touched twice
by the touching pen)
2. if the setting rule of the mail is
downloading the head of the mail, then
you can only read the brief information
of the mai.
2.3.11
the dialing setting
1. choosing the “set” in the “menu” in the
soft button warning area on the main screen,
you will get into the setting screen of the
system of the e-mail. The e-mail can be sent
and received by dialing through choosing
the “dialing set” in the “menu” and the
“GPPRS NET”.
2.3.9 searching the e-mail
1. On the main screen of the e-mail, you
can choose the “finding” in the “menu” in the
warning area to input the consulting
conditions.
2. Pressing the left soft button (or using
the touching pen to touch the “enter” in the
warning area), you can enter into the screen
(The operations referred above can be
realized by the touching pen)
Notice: 1.in order to send and receive the
e-mail successfully, the customers should
open the GPRS of the SIM card and set the
account correctly.
The phone will tell you to input the phone
number and the content if you do not input
the receiver or content. And it will tell you
that the receivers has been more than 50
people.
Notice: the number of receivers is no more
than 50. the phone numbers should be
secluded by the semicolon.
The screen of the text editing is used to
edit the content of the short messages.
The menu can be used by pressing the
menu button:
1. “send”: sending the message currently
edited.
2. “insert daily words”: inserting the text of
presupposed messages in relation with the
subject will get you rid of the trouble of
inputting much information.
3. “saving into the drafting box”: the
message can be reused in the drafting box.
When the message is being sent, the
phone will tell you that “sending”; if sending
a message failed, it will tell you that
2. Not
choosing
the
SSL
safe
identification: setting the POP3 port with
110, SMTP port with 25. then the e-mail will
be sent and received in a normal way.
3. Choosing the SSL identification: POP3
port;9110 SMTP port:9025. the e-mail will
be sent and received normally.
2.4
Short Message
140 english letters and 70 chinese
characters can be sent into the customers’
mobile phones through the service center.
The short message provides the following
services: writing new messages, inbox,
outbox, drafting mail box, saving mail box,
sweeping box, daily words, parameter set,
cell info broadcast, phone message.
2.4.1 creating message
the new message can be created by
entering into the screen of editing the new
message.
“sending
failed,
resending?”,
the
The number of saving messages will be
dependent on the phone and the SIM.
The inbox saves all the received messages.
Each one will have one icon to show
whether it is read or not. The opened
envelope means that it has been read;
otherwise it has not. Choosing the OK (or
using the touching pen to have a double
touch on the selection)will read the
message.
unsuccessful sending message will be
saved in the inbox.
If it succeed in sending a message, the
phone will tell you that sending ; whether it
is successful or not ,the collective sending
will show you a result; the sent messages
will be saved in the inbox.
2.4.2 Inbox
while receiving a short message ,the
phone will send a alert tone and save it into
the inbox. And “ a short message” will
appear on the screen to alert the
customers. You can enter into in the inbox
screen by pressing the OK (or using the
touching pen to touch the message); then
the phone can return to the screen by the
C button. And the little envelope icon in the
shortcut function will change its color to
alert that there is a message to be read
and save it into the phone or the SIM
automatically. And the phone can reach the
screen of the inbox by touching the icon.
The menu can be activated by pressing the
menu button,
1.
“reply”: replying the current short
messages;
2.
“forward”: editing the current
message on the screen and forwarding to
other people;
3.
“delete”: deleting the current
message, then returning to the inbox(the
customers will be informed whether to
delete it or not);
4.
“call”: calling the phone number of
the current message;
5.
“save number”: saving the phone
message
and
returning
to
the
number of the current message into the
address(it is as the same as to create a
new address );
outbox(identifying whether to delete or
not);
3.
“call”: calling the number of the
6.
“move”: moving the message into
current message.
the saved box;
4.
“save”: saving the number into the
7.
“trash”: moving the message into
address(It is as the same as to create a
new address);
the trash box. If the number is not trash
through transferring the phone will tell the
customers whether to set the number as a
trash number or not.
5.
“move”: moving the message into
the saved box.
2.4.4 draft box
8.
“use number”: the customer will
the draft is used to save self-defined,
common-used and useful messages. Edit,
delete, call, save number and move can be
used in the soft button alert area.
choose to save the number selected from
message.
2.4.3 outbox
the detail of sent or unsent message can
be got in the outbox.. the edit, delete, call,
save and move can be used in your
reading.
1.
“edit” entering into the screen of
editing messages and editing the
message.
2. “delete”: deleting the current message
and returning to the outbox(identifying
whether to delete or not);
1.
“edit” entering into the screen of
editing messages and editing the
message.
3. “call”: calling the number of the current
message.
2.
“delete”: deleting the current
4. “save”: saving the number in to the
address (it is as the same as to create a
new address);
5. “move”: moving the message into the
saved box.
2.4.6 trash
when the refusing the trash number is used
in safety set. If the message is trash, it will
be save into the trash directly. When it is
full, the newly receiving message will cover
the first message. delete, call and move
can be used in the soft button alert area.
1. “delete”: deleting the current message
and returning to the draft(the customers
will be informed whether to delete it or not);
2. “call”: calling the number of the
current message.
2.4.5 saved box
the saved box is used to save the
messages from other boxers. Edit, delete,
call, save number and move can be used
in the soft button alert area.
1.
“edit” entering into the screen of
editing messages and editing the
message.
2. “delete”: deleting the current message
and returning to the outbox(identifying
whether to delete or not);
3. “move”: moving the message into the
inbox.( if the inbox is full, it will tell you that
operation failed).
2.4.7 common use
3. “call”: calling the number of the current
message.
4. “save”: saving the number in to the
address (it is as the same as to create a
new address);
the frequently used words can be insert
into the text directly. It can save time.
2.4.8 parameter set
setting the parameters of the message, such
as “SMS center number”, “type”, ”location”,
“validity”, result report, reply path, setting
vocabulary.
5. “move”: moving the message into the
saved box.
1. service center number
settings.
if providing the service ,the net agent
provides SMS center number.
2. location
you can select a location to save the
message. When it is full ,the phone will
change into another location. The phone will
not inform you that the inbox is full unless
the two locations are full. You can choose
to use phone or the SIM first.
2.4.9 voice mail
1. calling :calling the set center number.
2. the center number: the menu can be
used by the left soft button.
3. saving: saving the set center numbe.
4. address: you can choose the number
from it or input the center number by
yourself. You can also choose it from
the address by pressing the center
number.
3. types of message
you can choose SM, e-mail, voice and fax.
4. validity period
2.4.10 broadcast SMS
1. reception: receiving all kinds of
messages from the channel.
2. list: activating the menu by menu.
3. save: save the set menu.
4. adding: adding new channel
sets the length of time your message will be
saved in the SMS center:1 hours, 1day,
1week, 1 month, 1 year and maximum.
5. result report: it is used to identify whether
the receiver receives the message or not.
6. sending path: you can decide whether
to save the sent the message into the
inbox. You can choose send or send
and save.
5. change: changing
the chose
channel’s number and its name.
6. delete: deleting the unnecessary
channel on the deleting screen. You can
use the OK button(or using the touching
pen to touch it )to choose the settings of
7. setting vocabulary: editing and saving
the channel to decide to receive the
messages from the channel.
2.5 MMS
If
you
receive
message
including
unsupported objects, it will not appear or be
played.
The MMS is composed of texts, pictures and
voice. Due to the MMS(multimedia
messaging service), the phone can receive
and send pictures, sound and texts.
Attention: MMS service works via your
network administrator or service provider.
This mobile phone supports receiving the
maximum size of 50 KB. It will stop
automatically receive the information if it is
beyond limitation.
Attention: there are may reasons for the
failure of sending messages, so please do
not use MMS message to send the key
information.
2.5.1 New creation
while setting new or editing MMS, please
follow the following steps:
1. in the message screen, choosing the
new in the menu of the soft button alert
area.
This mobile phone supports MMS for pages,
that is each paper has one picture, one song
and characters. The MMS consists of many
kinds of this page.
Attention: while using MMS, you may pay for
information to the service provider of
network administrator.
MMS supports the following forms:
Pictures: JPEG, GIF.
Sounds: MP3, WAV, MIDI, AMR
2. pressing U or D(or using the touching
pen to touch)to select receiver, subject
and the mail content. Then pressing OK
(or using the touching pen to have a
double touch) to reach the window for
editing.
3. selecting receivers: you can choose the
phone number from the address or
input the number on the screen directly.
If the receiver is empty, when you need
to send it , the phone will tell you to
input the number
item. The pictures item is the default setting.
7. when you insert music, you can use the
append music channel in the menu of
the soft button alert area. Then entering
in the file list screen, you can use U or
D (or a double touch)to check the music
files, and then use the left soft button(or
the touch pen to touch the identify in the
soft button alert area)to insert the music
file into the MMS service.
8. while changing the pictures, you can
use changing pictures in the menu. The
following operation is as the same as
the inserting pictures.
9. while changing the music channel, you
can use changing music channel. The
following operation is as the same sa
the inserting music files.
Attention: 10 numbers are the maximum.
4. while inputting the subjects, you can
directly press U or D on the editing
screen (or use the touching pen to
touch)to move the focus to select the
subject. Then you can input the content
and edit it.
5. you can insert pictures and music or
edited text into the MMS message while
editing the content.
6. while inserting pictures into the editing
screen ,you can select the appending
picture in the menu. Then you can
press U or D (or have a double touch by
the touching pen)to select pictures
while browsing the list screen. You can
use the OK (or have a double touch) to
browse the pictures. Then you can use
the select in the menu to insert the
pictures into the MMS message.
10. if you want to delete the current
inserting pictures, you can use the
delete picture in the menu of the soft
button alert area.
Attention: the customers can choose in any
11. if you want to delete the current
inserting music, you can use the
deleting music in the menu of the soft
button area.
16. if you want to send messages. You can
select the send menu to finish it.
Attention: 1. the MMS messages can only
be stored in the mobile phone, as they
possess too much space.
12. if the customers want to send
polypaged multimedia messages, you
can choose the insert page in the menu
of the soft button alert area. Then select
to insert new pages to insert a page of a
new MMS, and the procedure of the
operation is as the same as the former
one. You can also select deleting
page ,pageup and pagedown to switch
the pages.
2.before you send it the settings should
be made first.
3. when the message is being sent the
phone will inform you with “connecting with
the net”-“connecting with the net
gateway”-“sending message”, if it fails, the
phone will inform you with “message fails”.
The failed messages will be stored in to the
message unsending box(if there is enough
space).
13. the settings of pages is used to identify
the playing period of each one.
14. editing MMS text. You can input
characters in the editing frame. You can
also use the insert words in the menu to
insert presupposed text into the target
place.
4. if it completes, the phone will tell you
with “sending completed”. If the option
“keep copies” is activated. The sent
messages will be automatically stored in
the sentbox.
15. if you want to have a view of the
message before you send it.you can
select view in the menu.
5. it will take longer time to send a MMS
message than a ordinary message.
2.5.2 Inbox
when a MMS message is received, the
mobile phone will give you a alert bell and
store the message into the inbox. While in
the waiting , the phone will tell you by a
new frame and change the color of the icon.
The number of the saving messages is
dependent on the capacity of the phone.
When you enter the inbox, you will find that
all the received messages are stored in the
inbox. And there is an icon of a little
envelope before each message to indicate
the status of the message.
An icon of an open envelope indicates that
the message has been read while that of a
closed one indicates that it has been
viewed yet. You can use the OK(or a
double touch by the pen )to read the
message.
is successful or not. If it fails, you can
download it again.
By choosing detail, you use play, reply,
delete, forward, call, save number, save
picture, save music and move.
Play: playing the picture, sound and text
automatically.
Reply: replying to the current message.
Delete: deleting current message and
returning to the inbox. The phone will
inform you whether to delete it or not.
Call: call the number of the current
message.
Save: entering the address and saving the
number
Move: move the message into the
savedbox for the future use.
2.5.4 outbox
The first receiving message is the notice.
you can use OK (or a double touch )to
identify whether to download or not. If you
choose identify, you will download the
message. The phone will inform whether it
you can browse the sent message in the
outbox. You can roll the selection bar to
select the message.
While reading ,you can get the option of
playing, editing, deleting, calling, saving
number and moving.
Play: playing the message automatically.
Edit: editing the message
phone will inform you whether to delete it
or noe.
Call: calling the numer
Delete: deleting the current message and
returning the outbox automatically. The
phone will inform you whether to delete it
or noe.
Save: entering the address and storing the
receiver’s number.
Move: moving the message into the
savedbox for the future use.
Call: calling the numer
2.5.6 saved box
Save: entering the address and storing the
receiver’s number.
Move: moving the message into the
savedbox for the future use.
the saved box is used to store the
message. You can roll the selection bar to
read the message.
While reading ,you can get the option of
playing, editing, deleting, calling, saving
number , storing pictures and storing
music.
Play: playing the message automatically.
Edit: editing the message
Delete: deleting the current message and
returning the outbox automatically. The
phone will inform you whether to delete it
or noe.
2.5.5 draft
the draft is used to store the edited
message. You can roll the selection bar to
read the message.
While reading ,you can get the option of
playing, editing, deleting, calling, saving
number and moving.
Play: playing the message automatically.
Edit: editing the message
Delete: deleting the current message and
returning the outbox automatically. The
Call: calling the numer
Save: entering the address and storing the
receiver or sender number.
gateway, MMS center, port, sending report
are restored to the default settings.
(the operations above can be realized by
the touching pen)
Storing pictures: all the pictures in a MMS
message will appear when you enter the
stored pictures screen. And then you can
store them in the index of the your
resource.
2.6
the
Haier
Entertainment(network-dependent)
Storing music: all the music in a MMS 1.
message will appear when you enter the
stored music screen . and then you can
store them in the index of your resource.
haier world: the mobile phone
agent provides a entertainment net. You
can activate the WAP directly and go into
the http://wap.haier.com
2.5.7 MMS setting
2.
GPRS: the network service agent
provide the wap. You can browse
wap.moternet.com.
Attention: you can press the L to go into
the haier world and GPRS.
the address of gateway: connecting with
beehive network and wanwei network/
MMS center: the address of the MMS
service center.
Port: the port number of the MMS service 3.
center.
Deliver report: to set if the sender should
be reported when message is sent to the
receiver.
haier entertainment: it provides
the customers a large of entertainment
items. You can order it by sending
messages. The specific items will be
dependent on the types of the SIM card.
You can ask the local agent to get the
detail.
Setting vocabulary: see the operation of
the short message.
Restore factory settings: the address of
You will pay for
Ordering and
downloading any the entertainment items,
according to different types. You can get
the exact bill from the explanation from the
list of the entertainment. This service is 3.
free of charge.
selecting the backward in the menu of the
soft key area(or use the touching pen
touch the backward)
there are some frames for
inputting the characters in the netpages for
communication. You can input the
characters by the touching pen.
you can carry on all kinds of
operations on the browser by using the
menu.
(the operation above can be realized by
the touching pen)
2.7 browser
4.
the mobile phone has the function of
GPRS. You can use the data calling to
connect with the internet. You can also 5.
browser the internet under the support of
the GSM. And the world will have a close
relationship with you.
Attention: to browse the netpage through
GPRS depends on if the network agent
provides the service and if you have the
service.
the menu includes the following
functions:
connection-dialing to the internet.
Bookmark-entering into the list of the
bookmark.
Pageup-returning to the last netpage.
Pagdown-down to the next netpage.
Forward-entering the next level of the
current netpage.
2.7.1 open the netpage
1.
you can browse the internet or the
Backwadd-entering the high level fo the
current netpage.
Stop-stopping downloading the data
Refresh-downloading the data again.
list by the touching pen, and get into the
connection by it.
2. you can return the last window by
Set-setting the browser
2.7.3cutting off from the net
Storing the netpage- showing the list, and
adding the new one into it.
Collection-showing the list ,and adding the
new one into it.
Returning-connecting with the main
address.
you can select the quit in the menu of the
soft key area to stop using the application
of the browser.
(the operations above can be realized by
the touching pen)
2.7.4 setting of net connection
Dialing path-setting the configuration list
and using them to connect with the net.
Cutting off from the net-cutting off
(the operations above can be realized by
the touching pen)
the customers can use different account to
connect with the net by different ways. You
can use the net function for the account to
select and create the settings of the
connection.
2.7.2 downloading the data
selecting the settings.
1. you can use the connection or call in
the menu of the soft key area to have a
connection with the net and download the
data.
If you want to select the connection
settings, you can enter the dialing selection
window by pressing the dialing path in the
menu. Then pressing connecting to get in
the net. The mobile phone has three
default settings: they are GPRS_WAP,
GPRS_NET, CSD_WAP.
2. the customers must appointed
a
location for the data. The customer’s
resource in the mobile phone must have
enough capacity for them.
2. Creating new settings
(The touching pen can realize the
operations above)
If you want to create new settings ,you
should input new information. You can ask
the net agent to get the setting information.
1) entering the window of the dialing path
by pressing the dialing path in the menu of
the soft key area.
2) Selecting a setting list and entering it.
3) Inputting the content of settings
4) After finishing it ,you can press left soft
key (or touch the save on the soft key)to
store settings.
5) You can quit without storing it by
pressing the right soft key (or touch the
return on the soft key)
(the operations above can be realized by
the touching pen)
provide the following services: new
recommendation, the original card number,
comprehensive
news,
happy
communication, entertainment, customer
service, card list, SM group and dynamic
distribution. While some areas which
support the GPRS will provide the following
services: identification, the information of
cards, inquiry of bill, flying seeing of yangzi,
prophet of the climate, the information of
the stake, the information of lottery, mobile
bbs and so on. The content of the STK is
all dependent on the SIM card agent.
You can get more detail news from the
local agents.
2.8 STK
STK provides value added service of the
SIM card.
Attention: the window will not appear the
application of the STK if you do not insert
the SIM card.
The services provided by the STK are
different according to the types of the SIM
card. The China Mobile’s SIM card will
have functions, while the SIM card of
Unicom has little more. For example, some
areas which supporting the world com will
2.9 Flying mode
if the mobile phone is await, you can use the
OK or left soft key to enter the main menu.
And then you can use U or D to choose the
communication menu. By pressing the OK
or L you can move the U,P,L,R to select the
icon of flying mode. Pressing ok or left soft
key , or to touch the quick function icon on
the top to open or close the mode.
It is effective when it is restarted. Opening
the mode will not result in initialization. The
functions in relation with the net, SIM card
will exert nothing.
3.1.3shooting model:
1. single-shoot: to take common single
photo.
2. successive shoot: to take photos
successively;
3. 10-seconds delaying shoot: take 10
seconds shoot.
3.1.4camera setting
Attention: though the functions can not be
used, you should be careful to use this
mode in the situation of commanding that
the mobile phones should be powered off.
3. Application of multimedia list
3.1 Camera
you can change the setting by pressing the
menu key at the left side or to touch the
screen to find the hidden menu.
The settings of the camera include:
1. The mode of camera: single shoot,
successive shoot, 10 seconds delaying
shoot
3.1.1 Application
You can select the icon or press the button
enter into the camera. The photos will
appear in the screen.
2. The white balance: automatica, sunny,
cloud, daylight lamp and fluorometry.
3. The quality of shoot: choosing common,
elaborate and super-elaborate.
4. The mode of MMS: selecting open or
close.
3.1.2camera
You can press the photo key at the right side
of the phone to take photo. And the photos
will be stored in the picture profile of the
customer’s resource.
5. Effectiveness: close, natural, vivid, tea,
cold, reversal and blackwhite color.
6. The compensation of exposal
7. The accommodation of the screen’s
brightness.
On the screen of the preview of the
photo, you can press the photo key to
switch into the camera screen.
8. The mode of night: selecting open or
close.
9. The size of the photos: setting the size
14. The application of quit: pressing mode
key, the power key or the hanging up
key. Or touch the MODE icon on the
topleft of the screen.
MAX 1280*1024,
L
640*480,
M
320*240, Min 176*144
3.2 Movie capture
10. The storing location: you can store the
photos in the mobile phone or in the SD
card.
3.2.1
Application
You can enter it by pressing the icon. The
image captured will appear on the screen.
11. UP/DOWN: you can touch the icon on
the righttop to realize it. Pressing the
1-9,#* can also finish it.
12. adjusting the focus: while you are taking
photos, you can press the 2 on the right
to enlarge the focus. While the 3 to
shorten it. Or you can use U or D to
adjust the focus.
3.2.2
Capture
you can press the capture key at the right
side of the phone to take short film. The
red round icon means that it is capturing. If
you press it again, the red round icon will
disappear. It means capture is over. The
short film will be stored in the movie
profiles of the customer’s resource.
13. the preview of the photos: you can
press the mode key to switch among
the modes of camera, preview of photo,
movie capture and preview of short film.
1.
sunny,
The white balance: automatica,
cloud, daylight lamp and
fluorometry
2. Effectiveness: close, natural, vivid,
tea, cold, reversal and blackwhite color.
Downplay or stop
3.
4.
the compensation of exposal
the size of the short film: L320*240,
Left-turning down volume
Right-turning up volume
Min 176*144.
OK recording or stopping record
Left soft key-enter record file list
Right soft key-quit and store current files
5.
UP/DOWN: you can touch the icon
on the righttop to realize it. Pressing the
1-9,#* can also finish it.
3.3.2
Recording
6.
the storing location: you can store
1. Setting time: pressing the editing time
frame and editing time. The maximum is 10
minutes.
2. Pressing the OK (or touch the record by
the pen ) starts recording. While recording,
you can use the L or R to adjust the volume
(or touch the volume by the pen). You can
pause it by the U (or touch the pause)
3. The file will be stored in the record
profiles of the customer’s resource.
the films in the phone or in the SD card.
7. the preview of the films: you can press
the mode key to switch among the modes
of camera, preview of film, movie capture
and preview of short film. On the screen of
the preview of the film, you can press the
photo key to switch into the camera
screen.
8.
the application of quit: pressing
mode key , the power key or the hanging
up key. or touch the MODE icon on the
topleft of the screen.
4. The form is the yy, mm, dd, hh, mm, ss.
3.3.3playing the recording files
1. After entering the record window you
can play the files using the left soft key(or
by a double touch on the list of the
files),then select the file to be played.
3.3 recoder
3.3.1
Introduction of keys in the screen
up-pause
2. While playing you can use the L or R
(or touch the control) to control the volume,
and U to pause while D to continue.
3.3.4 deleting record files
When you delete the files, you should
delete them in the record profiles of the
customer’s resource; if you want to delete
them in the list of the record application,
you should choose the delete on the soft
key. if you delete the record, the one in the
customer’s resource will disappear.
3.4 Video
Pressing the U or D (or 2 key on the right, 3
key on the right) can switch to the correct
files. Pressing the L or R (or mode, menu)
is to control the volume. Pressing left soft
key is to make the video maximum or
minimum. Pressing OK is to pause or play.
Pressing the right soft key is to stop. It will
return to the playing list by pressing it again.
Pressing C key is to return to the playing
list; home is to the main menu.
(the operations above can be realized by
the touching pen)
the profile in the video list is the default
setting video in the kinescope of the
customer’s resource. If you want to play
other files, you can select other index in the
menu of the soft key. the application of the
customer’s resource will give you what you
want to play.
you can enter the index of the customer’s
resource. Entering the profiles, you can
press the U or P to select the video. You
can use OK to play it. The operation is as
the same as the above.
3.3.3
The use of AV-LIND (only for the
customers buying AV-LINK)
3.4.1
Playing video
inserting one part of the AV-LINE into the
phone, the other part into the music
inputting of the TV. Then video and music
will be on the TV. If you pull out the line
You can use UD or the touch pen to select
which you want. Pressing OK (or a double
touch on select) is to start playing.
from the phone, video and music will return
to the phone. The line will not influence the
operation of the fundamental functions,
such as sending and receiving messages ,
picking up the call.
Some audio files can be operated
through the audio player. However, some
audio files of certain formats and some large
files can not be operated due to the
limitation of the mobile.
The introduction of inserting the AV-lINE
3.5.1 Enter the audio player
1.
when the mobile phone is not in
1. Click the ‘audio player’ icon of the
shortcut menu at the top of the screen with
the touch pen.
the inserting screen, if you insert the line,
the content will sill on the phone.
2.
when the mobile phone is
2. Enter the operation of ‘audio play’ by
clicking the MP3 key.
3. Choose ‘audio play’ of the main menu to
enter the ‘audio play’.
inserting screen, if you insert the line into
the phone , the phone will become black.
Meanwile, the TV will not play either. If you
insert the line into the TV, the phone will
still be black.
3.5.2 Add audio files
1. To operate the adio files, choose the
‘music list’of ‘menu’in the soft key tip zone to
enter the music list.
2. Click twice the ‘add’ in the ‘menu’of the
soft key tip zone to enter the music files
folder menu. Then choose the audio file you
like and click ‘confirm’to return to the music
list.
3.
when the TV is on play, if you quit
from the list or pull out the line from the
phone. The show will be on the phone’s
screen.
4.
when the TV is on play, if you pull
out the line from the TV, the TV will not play
and the mobile phone will be black.
3.5 Audio Player
3. Click twice the audio file to play, or
choose the ‘play’in the ‘menu’ of the soft key
tip zone. (or click the ‘play’on the screen
with the touch pen.)
sound track.
4. ‘Right track’ Switch the music to the right
sound track.
3.5.3 Move audio files
5. ‘Even’ Make the music sound track even.
6. ‘Sequential play’ play the music files in the
list sequentially.
7. ‘Arbitrary play’ plays the music files
arbitrarily.
To move the files in the play list, choose the
‘up’ and ‘down’ in the ‘menu’ of the soft key
tip zone to move the chosen audio files up or
down.
3. 5.4 Delete Audio Files
8. ‘repetition’ repeatedly plays a single
music.
9. ‘Hide’ Hide the music player and operate
it behind the screen.
10. ‘the previous’ play the previous music
file. (up key)
11. ‘the next’ play the next music file. (down
key)
12. ‘stop’ Stop playing, ‘pause’ Pause the
player.
13. ‘left key’ tune down the volume; ‘right
key’tune up the volume.
14. Press the ‘mode’key(on the left of the
mobile) to tune up and press the ‘menu’ key
(on the left of the mobile) to tune down the
To delete the files in the music list, choose
the ‘delete’ of the ‘menu’of soft key tip zone
to enter files list. Choose the files you want
to delete, click ‘delete’, then there will be a
tip window ‘are you sure to delete?’, click
‘yes’ to delete the chosen file.
3.5.5 The main screen menu of the audio
player and the functions of the keys.
1. ‘Music list’ You can enter the music list
to add or delete music files.
2. ‘Play’ Play the music in the music list
(the time and name of the music played is
revealed on the screen)
3. ‘Left track’ Switch the music to the left
volume.
dial). The music will be paused during your
call.
You can write, coin and send messages
without turning off the player.
Warning, during the operation of the player,
any inappropriate insertion or pulling out of
the MMC and USB will lead to the instability
of the system and an eternal damage to the
MMC card.
15. Press the key 1(on the right of the
mobile) to play the previous file and press
the key 2(on the left of the mobile) to play
the next file.
3.5.6 The play formats supported by the
audio player
The audio player supports the following
formats: mp3, amr, midi(mid), wav.
The player can’t play the damaged files
of the listed formats and will automatically
delete them from the play list.
3.6 Browse the pictures
You can browse the pictures saved in the
mobile through the browse function. Enter
the ‘picture list’ and the picture files in the
‘photo’ folder of the user’s information folder.
Also, you can choose the ‘open picture’ of
the ‘menu’ in the soft key tip zone to choose
the pictures under other items of the user’s
information folder.
1. ‘Cut down pictures’: choose the ‘cut
down pictures’ in the ‘menu’ of the soft
key tip zone.(or click the ‘cut down
pictures/list switching’ icon) to switch
between cut down pictures and picture
3. 5.7 Dialing and receiving calls during the
playing of music files.
If there are any calls, messages or other
information during the playing of music files,
the mobile will pause the playing and a tip
window will be revealed. You can choose to
receive to refuse the calls.
Choose ‘call off’ to end the telephone call
and you can continue to listen to the music.
You can dial the mobile without turning off
the player (the player will be hidden if you
list.
8. ‘Original’ You can choose the ‘original’
and ‘window matching’ in the ‘menu’ (or
click the corresponding icon at the
bottom of the picture with the touch pen)
to switch the size of the pictures.
2. ‘Reset’ click ‘reset’ to switch the cursor
to the first picture.
3. ‘Delete’ click ‘delete’ to delete all or part
of the pictures.(or click the ‘delete’ icon
at the upper right screen with the touch
pen.)
9. ‘Open picture’ open the pictures under
other items.
4. ‘wall paper’ open a picture, choose the
‘wall paper’ in the ‘menu’ of the soft key
tip zone (or click the ‘wall paper’ icon at
the bottom of the picture) to set the
picture as a wall paper.
5. ‘MMS’ press ‘mms’ to send the picture
as an attachment of the MMS.
6. ‘MMS’ press ‘mms’ to send the picture
as an attachment of the MMS.
10. 90 degree revolving: a 90 degree’s
revolving to the chosen picture.
11. The manipulation of the connection to
the link wires.
a. When the mobile is on the single picture
browsing mode, connect the mobile with
a link wires to enter the TV single picture
browsing mode. The mobile will be in
black screen at the moment.
7. Switch the pictures: You can choose the
‘previous’ and ‘next’ in the ‘menu’ of the
soft key tip zone or press left or right
direction key to switch pictures. (or click
the ‘left and right switch’ icon at the
bottom of the picture with the touch
pen.)
b. Press left and right direction key or the
key2 and 3 of the right side of the mobile
to switch the pictures at the TV browsing
mode. (The switching function of the
key2 and 3 of the right side of the mobile
can only be available at the TV mode.)
c. At the TV browse mode, press CLR key,
power key/call off key, home key to quit
the TV mode and the screen will be
bright again. Meanwhile, the original
functions of CLR key, power key/call off
key, home key will be resumed.
or a click on the screen will make the
mobile quit the TV mode and resume to
the single picture browsing mode. At the
moment (the link wire still connected),
there will be a ‘TV browsing’ item of the
menu on the screen. Press left or right
key or connect the link wire again and
process any manipulation on the screen
to switch back to TV single picture
browsing mode and the mobile will
return to the black screen. (If you
choose the ‘MMS’ icon, the TV single
picture browsing mode will be resumed
before the stimulation of the MMS
program, after witch the MMS editing
window will be revealed.)
d. At the TV browse mode, press MP3 key
to quit the TV mode and black screen
state, meanwhile the operation of MP3
will be stimulated. At the time, all your
manipulations will be targeted to the
MP3. The MP3 will be played through
the TV track instead of the mobile track.
If you hide MP3 again, the mobile will
return to the single picture browsing
mode and all the manipulations will be
targeted to the browsing function and
the MP3 will continue to play through the
TV track.
g. The realization function of the key 2, 3 at
the right side of the mobile depends on
the operation of the stimulation.
h. Only the static pictures of appropriate
formats can be revealed on the TV
through the connection with the link wire.
The motion pictures or pictures of
e. At the TV browse mode, the left and
right soft keys, the mode, menu and
shoot key will not be have any functions.
f. At the TV mode, a click of any keys
(excluding the keys mentioned above)
inappropriate formats viewed under the
mobile browsing mode can’t be viewed
on the TV. When pictures are viewed at
the TV mode, if a motion picture or a
picture of an inappropriate format is
switched, the TV will not reveal the
picture and the TV browse mode will be
quitted.
1280*1024 for static pictures and 226*170
for motion pictures.
3. Only the first frame of the GIF
pictures that are larger than the browsing
screen can be revealed.
3.7 Picture zooming in
You can use the zooming in function to
zooming in the corresponding pictures
saved in the ‘user’s information’ folder of the
mobile. Choose ‘zoom in’ to enter the jpeg
1024*768 pictures list under the photo item.
Click the left soft key( or click the ‘zoom in’ at
the soft key tip zone.), there will be tip for
you to zoom in the pictures. You can save
the zoomed in pictures to the MMC card.
Notice: As the zoomed in pictures are saved
to the MMC card directly, you can only
operate the ‘zoom in’ when the MMC card is
installed.
g. At the TV browse mode, the mobile will
be at a black screen state. Click the
shortcut item at the top of the screen
and the operation of the shortcut can be
stimulated. At the moment the screen
will turn illuminated and the TV mode
will be quitted. Meanwhile, all the
manipulations will be targeted to their
default functions accordingly when the
according manipulation are operated.
Notice: 1. The quality of pictures may be
degraded if there is a lack of sufficient lights.
2. The mobile supports the pictures
of the jpg, bmp, gif and png formats. The
maximal size supported by the mobile is
3.8 Picture Editing
The picture editor can only support the bmp
and jpg pictures. It can help you draw
pictures, edit pictures or rename pictures
with its drawing tools and all the functions
under the ‘menu’ of the soft key tip zone.
3.8.1 Drawing tools
zone.
f. Circle
Click the circle icon with the touching pen
and then you can draw circles and ovals at
the picture-editing zone.
3.8.1 Tool window
a. Frame
Click the frame icon with the touch pen and
then you can frame the picture at the
picture-editing zone.
g. Straight lines
Click the straight-line icon with the touching
pen and then you can draw straight lines at
the picture-editing zone.
b. Brush
Click the brush icon with the touch pen
and then you can draw or edit pictures.
c. Eraser
Click the eraser icon with the touch pen
and then you can erase the parts you don’t
want.
h. Revolve
Click the revolve icon with the touching
pen and then you can revolve the picture
you framed clockwise.
i. Words
Click the alphabet icon with the touching pen
to enter the words input screen. In put the
words you need and press the left soft key
(or click the ‘yes’ of the soft key tip zone).
Then the screen will return to the picture
editing window and the words you input will
be revealed on the picture.
d. Color bucket
Click the color bucket icon with the
touch pen and then you can add the colors
you want to the picture-editing zone.
e. Rectangle
Click the rectangle icon with the
touching pen and then you can draw
rectangles and squares at the picture-editing
3.8.1.2 Palette
a. Click the palette icon with the touching
pen and the palette will be revealed at the
picture-editing zone.
b. Choose the color you need and click the
chosen color with the touching pen; the
chosen colour will be on the palette.
c. Palette revealing
want to open. Click left key (or click ‘yes’
with the touching pen), the chosen picture
will be revealed at the picture-editing zone.
d. Adding frame
A frame will be added to the picture at
the picture-editing zone.
The now foreground colour will be the
colour you choose and the former
foreground color will turn to the
background colour.
e. Save as
Enter ‘save as’ window, input the file
name (the file name must be correct) and
then click the left soft key (or click ‘save’ with
the touching pen).
d. Switch icon
Click the switch icon to switch the
foreground and background colours.
3.8.1.3 The functions of items
You can choose the following items at the
soft key tip zone
f. Withdraw
The previous manipulation can be
withdrawn by a click of ‘withdraw’
3.9 User’s information
3.9.1 Newly established catalog
a. Save
Save the present picture
b. New
Enter the new picture-editing window
c. Open
Enter the picture list; click ‘up’ and ‘down’
direction button to choose the pictures you
Move the cursor to a default folder and
press ‘ok’ (or click the item with the touching
pen). Choose the ‘new’ of the ‘menu’ in the
soft key tip zone to enter the new catalog
window. After inputting the name for the new
catalog, press the left soft key (or click the
‘save’ of the soft key tip zone’ to establish
the new catalog under the default folder.
3.9.2 Open files
3.9.4 Delete
Enter the ‘user’s information’, then move
the cursor to the files to be deleted and
press ok (or click it with the touching pen) to
enter the folder. Choose ‘delete’of the
‘menu’in the soft key tip zone to open the
delete window. Choose the file you want to
delete and press the left soft key (or click the
‘delete’ of the soft key tip zone with the
touching pen). There will be a tip window for
confrmation of the deletion, press ‘ok’(or
click ‘yes’) to delete it.
Certain operations will be stimulated
according to the different types of the
recognized files. E.g. the ‘audio player’ will
be operated when a mp3 file is opened.
Take the opening of the mp3 file under the
recorder folder for example. First, enter
‘user’s information’ and move the cursor to
‘record’and press OK key (or click it with the
touching pen) to enter the folder, where
there are already some MP3 music. Move
the cursor to the music you like and press
ok(or click it with the touching pen) to play it.
3.9.3 Search
Enter the ‘user’s information’, then press the
left soft key at the folder list window(or click
the ‘search’at the soft key tip zone) to enter
the search window. Input the name of the
folder you want to find and then press the
left soft key(or click the ‘search’at the soft
key tip zone with the touching pen) to search
for it.
3.9.5 rename files
Enter the ‘user’s information’, move the
cursor to the folder containing the file you
want to rename and then press ‘ok’(or click it
with the touching pen) to enter it. Press the
up and down direction key to move the
cursor to the file to be renamed, then
choose ‘rename’of the ‘menu’in the soft key
tip zone to open the rename window. Input
the new name and then press the left soft
key(or click ‘save’in the soft key tip zone
with the touching pen) to finish the renaming
process.
copy the related files to the mobile through
the manipulation of your PC.
3.9.6 MMS sending
Send the present picture as
attachment
3.9.7 Email sending
Send the present picture as an email
attachment
2. After the installation of the MMC card,
there will be a MMC card folder in the ‘user’s
information’and you can manipulate on it. If
the MMS card is used with the PC, the folder
will not be revealed. If you want to pull out
the MMC card, you should click the shortcut
icon and process the tipped manipulations
first.
a
MMS
3.9.8 UP
Switch to the upper window of the ‘user’s
information’
4.1 Schedule
3.9.9 Cut, copy and paste
Cut or copy the present file and press ‘paste’
at under the target folder
3.9.10 property
You can check the detailed information of
the present file.
3.9.11 Manipulations related to the U(MMC)
drive
1. If the mobile is used as a USB drive, you
can only see the setup folder in the ‘user’s
information’. However, all the default
catalogs will be revealed on PC and you can
Through the schedule function you can input
related information and setup informing time
so that the mobile phone can inform you of
the information at the previously set time.
4.1.1 New schedule
Press the left soft key(or click the ‘week’/
‘month’ at the soft key tip zone with the
touching pen, then choose the date with the
‘month’ and choose to swith the chosen
dates through ‘week’. After the cursor is
moved to the chosen date, press ‘ok’key if
there is no record on it (or click it with the
touching pen) and you can establish a new
schedule. If there is already a record on the
chosen date, press ‘ok’(or click it with the
touching pen) to enter the schedule list.
Then select ‘new’of the menu at the tip zone
to establish a new schedule. Under the
editing window, input the content for ‘topic’,
‘beginning time’, ‘end time’, ‘informing in
advance’. Then, you can choose ‘save’in the
menu of the soft key tip zone to save or
press ‘send as message’or ‘send as email’
to send it after your editing. There will be a
red — mark and a √ icon for this date at
the month calendar and week calendar
respectively.
Enter a date where you have completed the
schedule, choose the ‘deletion’ in the menu
of the soft key tip zone to enter the ‘deletion’
window. Choose the schedule you want to
delete, press the left soft key (or click
‘deletion’with the touching pen), there will be
a tip window for confirmation. Press ‘ok’(or
click ‘yes’with the touching pen) to delete the
schedule.
4.1.4 State
Enter a date where you have completed the
schedule, choose the ‘state’ in the menu of
the soft key tip zone to enter the ‘state’
window. You can check the state of the
schedule, including how many schedules
you have saved, how much free has been
left. The state can only be browsed, any
manipulation to it is impossible.
4.1.2 Search
Enter a date where you have completed the
schedule, choose ‘search’ in the menu of the
soft key tip zone. Input the search content
and press the left soft key (or click ‘search’
with the touching pen) to search for the
schedule you want to find.
4.2 Task
You can input related information in the
‘task’
4.2.1 New task
Choose ‘new’in the ‘menu’of the soft key
4.1.3 Deletion
tip zone to establish a new task. If there is
no record in the task list, you can press the
left soft key to establish a new task directly.
Input the contents in ‘topic’, ‘begin’, ‘finish’,
‘person’and ‘content’, then choose ‘save’in
the ‘menu’ of the soft key tip zone to save.
Also, you can choose ‘send as a message’or
‘send as an email’in the ‘menu’of the soft
key tip zone to send the task item you
completed.
4.3 Electronic book
You can read some PDB and TXT files
through the electronic book.
4.2 Read electronic books
At the electronic book window, you can open
the electronic book list. Choose the book
you like by press the up and down direction
keys (or click the book with the touching
pen), then press ‘ok’ key( or click twice it
with the touching pen), or press the left soft
key (or click ‘read’ at the soft key tip zone) to
read. The size, the number of pages and the
present page number of the book can be
revealed on the reading window. Press the
left and right direction key (or click the two
keys of ‘switch pages’ on the window to
switch pages.
4.3.2 The setup of the electronic book
1. Specified character set
The mobile phone supports GB2312, UTF8,
UTF16, BIG5 character formats, all of which
can be switched to eacher other. The default
format is GB2312.
4.2.2 Search
Choose ‘search’ in the menu of the soft key
tip zone. Input the search content and press
the left soft key (or click ‘search’ with the
touching pen) to search for the task item you
want to find.
Choose the ‘deletion’ in the menu of the soft
key tip zone to enter the ‘deletion’ window.
Choose the task item you want to delete,
press the left soft key (or click ‘deletion’with
the touching pen), there will be a tip window
for confirmation. Press ‘ok’(or click ‘yes’with
the touching pen) to delete the task.
2. Specified size
4.4 Writing board
The mobile phone supports 16*16 and
24*24 font sizes, which can be switched
freely. The default size is 16*16.
3. Choose background picture
You can choose the pictures under the
folders of the mobiles to be the background
picture.
4、Choose the background colour
You can choose different colours to be the
background colour.
5、Choose the font colour
You can change the font colours.
6. Set up auto-rolling
You can set a screen rolling speed between
0-9999 mini-second
4.4.1 New writing board
Choose ‘new’in the ‘menu’of the soft key tip
zone to establish a new writing board. You
can choose ‘save’in the ‘menu’ of the soft
key tip zone to save. Also, you can choose
‘send as a message’or ‘send as an email’in
the ‘menu’of the soft key tip zone to send the
board you completed.
4.2.2 Search
Choose ‘search’ in the menu of the soft key
tip zone. Input the search content and press
the left soft key (or click ‘search’ with the
touching pen) to search for the writing board
you want to find.
4.4.3 Deletion
Choose the ‘deletion’ in the menu of the soft
key tip zone to enter the ‘deletion’ window.
Choose the writing board you want to delete,
press the left soft key (or click ‘deletion’with
the touching pen), there will be a tip window
for confirmation. Press ‘ok’(or click ‘yes’with
the touching pen) to delete the writing board.
7. Set up auto-screen turning
You can set a screen turning speed between
0-99 seconds
Notice: The items in ‘character set’ and ‘font
size’ can be set as default. All the electronic
books are presented with the default values
after such a setting.
4.4.4 Files management
item, then the alarm clock will ring every day.
4. Week ring: Press ‘ok’ key (or click with the
touching pen.) to choose ‘week ring’ item, a
selection list from Monday to Sunday will be
opened. You can press up and down
direction key (or click with the touching pen.)
to decide how many times the alarm clock
rings every week.
You can open and browse other files under
other folders through ‘user’s information’
4.5 Alarm clock
At the alarm clock window, there are two
sorts of alarm clocks; 3 repeating clocks and
two one-off clocks.
4.5.1 Repeating alarm clocks
Press up and down direction keys( or click
with the touching pen) to choose the alarm
clock to be edited and then press ‘ok’ key (or
click twice with the touching pen) to enter
the editing window.
1. Time: 24 hours, press number keys (or
click with the touching pen) to input alarm
clock time. E.g. if you press 0630, the alarm
clock will ring at 6:30 am. If you press 1800,
the alarm clock will ring at 6:00 pm.
2. Open: Press ‘ok’ key (or click with the
touching pen.) to choose ‘open’ item to
choose open or close the alarm clock.
3. Everyday ring: Press ‘ok’ key (or click with
the touching pen.) to choose ‘everyday ring’
4.5.2 One-off alarm clocks
Press up and down direction keys( or click
with the touching pen) to choose the alarm
clock to be edited and then press ‘ok’ key (or
click twice with the touching pen) to enter
the editing window.
1. Time: 24 hours, press number keys( or
click with the touching pen) to input alarm
clock time. E.g. if you press 0630, the alarm
clock will ring at 6:30 am. If you press 1800,
the alarm clock will ring at 6:00 pm.
2. Open: Press ‘ok’ key (or click with the
touching pen.) to choose ‘open’ item to
choose open or close the alarm clock.
3. Week selection: There will be single
selection list from Monday to Sunday, press
up and down direction key(or click with the
touching pen) to choose the date for the
alarm clock (single selection only). E.g. If
you choose 14:00, open, Friday, then the
alarm clock will ring at 2:00 pm on Friday.
The clock set will be cleared after the ringing
and will not ring again.
the ‘number’keys on the screen) to input
number, press up, down, left and right key
(or click the ‘calculating’key with the
touching pen) to calculate. Press OK key (or
click the ‘equalizer’key with the touching pen)
to get the result. Press CLR key(or click
‘back’key on the screen with the touching
pen) to delete input numbers. Press the left
soft key (or click the ‘clear’at the soft key tip
zone) to clear the results or residues.
4.5.3 Off Alarm clock
Choose the ‘off alarm clock’item, then set up
the alarm time at ‘repeating clock’ and
‘one-off clock’item. Then, press the left soft
key (click ‘save’at the soft key tip zone with
the touching pen). After the saving, the clock
will ring at the pre-set time even though the
mobile is turned off. If you don’t choose this
item, the clock will not ring if the mobile is
turned off at the preset time.
Notice: the calculating span of the calculator
is between 10－300 ～10160
.
4.7 Dictionary
1. Press the left soft key (or click the
‘Chinese to English/ English to Chinese’) to
switch between English- Chinese Dictionary
and Chinese- English Dictionary.
2. In English- Chinese Dictionary (Chinese-
English Dictionary) window, input the letters
or characters in the editing frame, then the
corresponding translations will be listed.
Press the ‘previous’ (‘next’) key with the
4.6 Calculator
The calculator has all the basic calculating
function: addition, subtraction, multiplication,
division, MC, MR, M+.
Manipulation: Press the number key(or click
touching pen to see the previous (next)
word’s translation. Press CLR key (or click
‘back’ key with the touching pen) to delete
the input words or characters.
3. Press the right soft key (or click ‘quit’ with
the touching pen) to quit the dictionary.
4.8 Data synchronization
Through this function, the synchronization
between the data in the Microsoft Outlook
2000 in PC and the data in the phonebook of
the mobile can be achieved.
then press the left soft key (or click ‘start’ at
the soft key tip zone). After the initialization
of the mobile, open the mFone Sync
program installed in the PC and press start.
There will be a progress span under the
synchronization
span.
After
the
synchronization, restart the mobile to finish
the data synchronization.
Notice: 1. To ensure the correctness, please
ensure that the time in PC is in coincidence
with the time of the mobile.
4.8.1 Preparation for synchronization
1. The Windows 2000 and XP system are
required. Also, the Outlook 2000 of Microsoft
Office and the mFone Sync program of the
CD-ROM of the phone should be setup.
2. Connect the mobile and the PC
appropriately with USB wire.
2. If unexpected situations occur during the
synchronization, please turn off the mFone
Sync program, quit the data synchronization
of the mobile and then restart the process
mentioned above.
4.9 Service telephone
4.8.2 Synchronization process
‘Service telephone’ provides you with all the
domestic service center phone number of
Qingdao Hai’er Communication Ltd all over
China. You can dial the numbers searching
for help.
The dialogue frame ‘for the USB drive?’ will
be opened after the USB wire is connected
to the mobile. Choose ‘no’ to enter the
mobile data synchronization window and
5.1 JAVA
You can download and update the
program written by j2me software from
web-sites through the java function of the
mobile so that the expension of potential
check if there are any differences between
the program downloaded in the mobile and
the same program provided by web sites. If
the program of web sites has been updated,
there will be tip informing you of updating. If
functions of the mobile can be ensured. Also, not, there will also be a tip telling you that
there are several default java programs for
you to use.
5.1.2 Program Deletion
Choose ‘deletion’ of ‘menu’ in the tip zone
to delete the installed program. There will be
tip window for confirmation. You can only
click ‘yes’ to confirm the deletion and the ‘ok’
key cannot work.
the program in your mobile is the latest.
The updating of the programs can be
achieved in two forms: 1. You can choose
the ‘updating’ in ‘menu’ to update directly. 2.
You can choose ‘management’ of ‘menu’
and then choose the ‘update’ of ‘menu’ to
update the program.
5.1.5
The
permission
setting
for
5.1.3 Management Program
downloading
Choose ‘management’ of ‘menu’ in the tip
zone to enter the program management
window, including the permission setting for
the program downloading and updating. The
followings are the details for ‘updating’ and
‘permission’.
You need different permission settings
to download programs from different
web-sites and you can have such settings
through ‘permission’.
There are two approaches to enter the
permission setting:1. You can choose
‘permission’ from ‘menu’ of the soft key tip
zone directly to set permissions. 2. You can
5.1.4 Program updating
You can choose ‘update’ in ‘menu’ to
choose ‘management’ of the ‘menu’ and
then choose ‘permission’ from ‘menu’ of the
softkey tip zone to set permissions.
through the operation of JAVA/SD will be
saved to the MMC/SD card. When the JAVA
program is to be operated again, the data
will be read from MMC/SD.
5.1.6 Download program
At the JAVA window, you can press the right
soft key( or click ‘setup’ in the soft key tip
zone with the touching pen) to enter the
program downloading window. You can
download the programs only after inputing
the correct web-address and connecting the
mobile to the internet through dialing.
Notice: 1. The local net support is needed
during the downloading process. The user
should also inaugurate the corresponding
network downloading services.
Notice: If the MMC/SD with installing
data is pulled off, the installed JAVA program
can not be stimulated through entering the
operation of JAVA/SD. If the installation
record of JAVA/SD exists, all the JAVA
program can be operated after the insertion
of different MMC/SD card.
5.3 Game
There are four games in the mobile:
Box-pulling, Five pieces chess, Huarong
route, Wujiandao. The game rules can be
browsed by selecting the ‘help’item from the
menu. You can quit the games by pressing
power/call off key or Home key at any time.
5.3.1 Box-pulling
2. To ensure a stable running of the
downloaded java program, please down the
qualified JAVA program provide by the legal
web-sites.
5.2 JAVA/SD
5.3.1.1 Game rules
The function of JAVA/SD is almost the
same as that of JAVA. The difference
between is that the JAVA programs installed
There 5 different items on the game window:
Wall, Box-puller, Box, Shady zone and bright
zone. The task for you is to pull all the boxes
to the shady area. The rules are: you can
pull a box forward and you can’t pull the
boxes against the wall or the boxes against
the other boxes.
the box, then you can pull the box.
7. There 70 missions in the game. The
mission number will be revealed at the
upper left top of the game. After each
mission, there will be news frame informing
you that you will be in the next mission.
5.3.2 Five piece chess
5.3.1.2 Manipulation
1. Choose ‘new game’in the ‘menu’of the
soft key tip zone to restart the game.
2. Choose ‘back’in the ‘menu’of the soft key
tip zone to cancel the previous step of
moving, one click of ‘back’can help to cancel
one step.
5.3.2.1 Game rules
This is an IQ game, you are going to
challege the computer. Who keep his five
pieces in a straight first will be the winner.
3. Choose ‘next mission’in the ‘menu’of the 5.3.2.2 Manipulation
soft key tip zone to enter the next mission. 1. You can place your piece on the
mission’in the chessboard by clicking with the touching pen
4. Choose ‘previous
‘menu’of the soft key tip zone to return the to start a new game.
previous mission.
2. You can choose ‘back’ in the menu of the
5. Choose ‘selection’in the ‘menu’of the soft soft key tip zone to take back the previously
key tip zone to choose from mission 1 to placed piece. You can keep on clicking ‘back’
mission 70.
until returning to the default state.
6. After the game starts, you can click the 3. If the whole board is filled with pieces
blank zone with the touching pen, the puller without a winner, there will be a news frame
will go to the target zone. Move the puller to telling you that there is a standoff. Then a
back of the box you want to move and click new game will be automatically started.
4. Choose the ‘hint’ of the ‘menu’ of the soft
key tip zone to reveal an ideal place for
placing a piece. This function will help the
beginners a lot.
5. Choose the ‘level’ of the ‘menu’ of the soft
key tip zone to set your level. You can
choose ‘beginner’, ‘medium player’and
‘advanced player’.
There is an exit about 2 squares wide for
Cao Chao to escape. There are 10 pieces of
different sizes, representing Cao Chao,
Zhang Fei, Zhao Yun, Ma Chao, Huang
Zhong, Guangyu and 4 pawns respectively.
After you enter the game window, there are
only 2 squares unoccupied. Your task is to
move the pieces with the touching pen to let
Cao Chao to escape from the Huarong
Route.
2. Choose the ‘back’ of the ‘menu’ can
cancel the previous move, you can click
back continuously for 16 times.
3. When the game is at the first mission (five
passes), you can choose ‘the next mission’
from the ‘menu’ of the soft key tip zone to
enter the next mission.
6. Press the right soft key (or click ‘quit’ of the
soft key tip zone with the touching pen) to
quit the game.
5.3.3 Huarong Route
‘Huarong Route’is a very ancient Chinese
game. It is called one of world’s three
incredibles due to its variable and interesting
rules. You can play the game by click
different pieces, counting many steps are
needed to get out of the route. Also, you can
play with your friends, who used the fewest
steps to get of the route will be the winner.
5.3.3.2 Manipulation
4. When the game is at the last mission (no
escape), you can choose ‘the previous
mission’from the ‘menu’ of the soft key tip
zone to return to the previous mission.
5. After the completion of each mission, a
news frame will be opened to inform you
1. The game window is a chessboard with
20 little squares, standing for Huarong route.
that you will enter the next mission.
6. Choose the ‘choose mission’ from the
‘menu’ of the soft key tip zone to choose the
mission you like. There are 6 missions: ‘five
passes’, ‘siege’, ‘brave heart’, ‘fledge’, ‘Not
far’ and ‘no escape’.
the block you choose and drag it to the
position you want and then lessen the block.
2. Choose ‘back’ from the ‘menu’ of the soft
key tip zone to quit the previous step. You
can keep on clicking ‘back’ continuously for
16 times.
7. Choose the ‘ranking’ from the ‘menu’ of
the soft key tip zone to see the highest score
of each mission, that is, the fewest steps
needed to get out of Huarong Route.
8 Press the right soft key (or click ‘quit’ of the
soft key tip zone with the touching pen) to
quit the game.
3. Choose the ‘previous mission’and ‘next
mission’from the ‘menu’of the soft key tip
zone to switch missions.
4. Choose the ‘choose mission group’ from
the ‘menu’ of the soft key tip zone to choose
a mission group. Then press the left soft key
(or click the ‘choose’of the soft key tip zone
with the touching pen) to enter the
corresponding mission group.
5.3.4 Wujiandao
5.3.4.1 Game rules
Wujiandao is an interesting IQ game. There
are blocks of different numbers and pictures
in each mission. When the blocks with the
same picture are moved together, they will
be cleared away. You should try to clear all
the blocks.
5. Choose ‘restart the group’ from the ‘menu’
of the soft key tip zone to clear all the
records of the group and restart from the
first mission of it.
6. Choose ‘restart the mission’ from the
‘menu’ of the soft key tip zone to restart the
mission.
5.3.4.2 Manipulations
1. After entering the game, you should press
7. Choose the ‘switch topic’ from the ‘menu’
of the soft key tip zone to switch topic.
5.3.4.3 Rules for scoring.
input
5.4.1. Key input
After entering the game, the score will be
presented to the upper right corner. 1 score
for the completion for one mission. On the
upper left corner of the screen, the reference
steps for passing the present mission will be
presented. A completion of the mission will
be 5 score. If you use fewer steps to finish
the mission, each step you save will be one
additional score. On the contrary, if you use
more steps, your default score will be taken
out (no minus score). The scores will be
amounted and the higher the scores, the
fewer the steps you used.
Notice: 1. Huarong Route and Wujiandao
can only be manipulated with the touching
pen.
2. Box-pulling and Five pieces chess can be
manipulated either with both keys and the
touching pens.
The mobile provide four input modes: Pinyin,
English, 123(number) and strokes. You can
set the input mode at the ‘mobile sets’. If you
have chosen the selections item before the
input modes, you can choose input mode to
input in the editing frames without inputing
content restrictions. E.g. If you choose
pinyin and English at the ‘mobile sets’, then
you can use both pinyin and English in the
the editing frame without inputing content
restrictions.
As for the editing frames without inputing
content restrictions, the default input mode
is pinyin. However, the frames with
restrictions, take the phonebook for example,
you can only input number when you want to
establish a new record. Thus, the default
input mode is 123 for this frame.
You can press * to switch the input
mode. When you choose the English mode,
you can choose 0 to swith the capitalized
5.4 Input
The board support key input and writing
and uncapitalized alphabets. Under the
pinyin and the English inputing mode, the
number key 1 will be a blank key, that is, if
you press number key 1, there will be a
blank left on the screen. The cursor will
appear by a press on #, and you can move
the cursor to locate the character you want
input by pressing the right soft key. If the
cursor is at the pinyin selection items, you
can also quit the input by pressing the left
soft key. If the cursor is at the character
selection items, a press of the left soft key
will add the characters to the editing frame
and the input window will be canceled.
by pressing the up and down directions keys. As for the stroke mode, the number keys 1
Press OK to confirm the character you
choose.
to 5 are marked with strokes. You can input
according to the strokes, the input
manipulation is the same as the pinyin
mode.
As for the English mode, you can press the
number keys to type letters. A first press of a
number key will type the first letter marked
on it.
When you use the pinyin mode, the number
key 2 to 9 will represent the letters and you
can press them to spell the character.
During the input, the cursor will be at the
pinyin selection item, you can switch the
cursor among the pinyins by pressing left
and right direction keys. You can press OK
to confirm the pinyin you choose and the
cursor will turn to the characters to be
selected. If you want the cursor to return to
the pinyin selection items, press CLR key.
Also, you can press CLR key to edit the
pinyin letters one by one. You can quit the
5.4.2 Writing input
You can move the curser to the editing
frame and click the editing frame with the
touching pen to switch to writing input mode.
After entering the input mode, the cursor will
be defaulted to Chinese if there is no
content restriction to the frame. If there is a
restriction to the input content, e.g. the
phonebook, the default input mode will be
123. According to the different inputing
content, the writing input modes are divided
into ‘Chinese’, ‘ABC-abc’, ’12,.’, “@#”、
information’. Then you can begin the
manipulation to the files in the MMC card.
2. After the loading, click the SD icon on the
TOP BAR to enter the list selection window.
Then press up and down direction key ( or
click with the touching pen) to choose and
manipulate ‘install/ uninstall MMC/SD card’
and ‘browse MMC/SD card’.
3. During the operation of the ‘user’s
information, press the up and down direction
key (or click with the touching pen) to
choose ‘mmc-sd1’and then press OK key (or
click twice ‘mmc-sd1) to open ‘mmc-sd1’.
Then you can operate the files in the MMC
card as well as the files under other
dialogues.
“ꢀ”.
When you input the contents, if the content
you want is already in the selection item,
you can click it with the touching pen to add
it to the editing frame.
You can click ꢀto delete the input content.
After the completion of the inputting, you can
press the left or right soft key to cancel the
input window.
Under the writing mode, you can move the
cursor by click the position for a time.
5.5 MMC
You can save files in the convenient MMC
card, which can help to expend the saving
space of the mobile phone.
Warning: Any inappropriate insertiaon or
pulling of the MMC card may lead to the
instability of the system and the eternal
damage to the MMC card.
5.6 USB
1. Insert the MMC card appropriately, after
the completion of the loading, there will be a
mmc-sd1 catalog under the ‘user’s
The USB can help the mobile to connect the
PC so that you can manipulate on the local
catalog of the mobile more efficiently.
1. When the mobile is used as a USB
drive, the PC can operate the files
under the‘user’s information’and there
will only an installation folder under the
root catalog of the mobile.
kinescope format the user’s information
or format it with the PC’. You use the
‘kinescope optimize’to format the
‘user’s information, or choose ‘format’of
the USB drive to format the ‘user’s
information on the PC. The former
approach is recommended.
2. If the mobile is not used as a USB drive,
you
can
operate
the
‘user’s
Warning: Any inappropriate insertiaon or
pulling of the USB may lead to the
instability of the system and the eternal
damage to the USB.
information’on the mobile and PC can’t
operate on it.
3. If the file system receives a slight
damage, there will be a tip window
‘slight damage on the file system, use
PC to repair the user’s information’
when the mobile is used as a USB
driver. And you can choose the ‘auto
repair of the errors’of the ‘check’ of the
‘tool’ under the ‘property’of the USB
drive on the PC. Then, you can press
‘start’ to repair the system.
4. If there is a severe damage to the
system, there will be a tip window ‘file
system damaged or unrecognizable,
for advice.
no) It is extremely cold.
Ⅴ Trouble Shooting
Slow
(or
keypad response
Move to a warmer
place and try again.
Problem
The
Remedy
display You need PIN code
indicates that the and PUK coke to
No
display
standby Press the Clear key
Turn the phone off
and then check if
the SIM card and
the battery are
properly installed.
phone is locked.
No signal
unlock the phone.
Contact your
service provider.
You
lose
connection
your
Settings.
with
Network
Your
Switch
phone
again.
on
and
the
try
location may be a
blind area(like in a
tunnel or between
high-rises) or not
covered by the
Network Settings.
Battery
flashing
icon The battery level is
during extremely low or
charging without the
battery level temperature is out
indicating bars
ambient
of the acceptable
range(0-4.5 Celsius
degree). Move the
battery to a warmer
place and wait
Change
your
location and try
again. Or contact
the service center
some
minutes
before
changing.
starting
What
difference
is
the Press
key
a
and
number
the
between pressing number
and pressing and displayed.
holding a number pressing
is
When
and
Flashing backlight Detach the charger
and battery icon, from the phone and
prolonged beep replace
with
a
key
holding
(one
and
prompt genuine one.
second at least) a
number key, you
“wrong
accessory”
can
activate
a
You can not use A car may contain
the phone in a car some metal parts
hotkey (refer to
setting
Hotkey)
special
(e.g.
pressing and hold
the [T9+*] key)
up
or
symbol
a
a
that
absorb
electromagnetic
wave and thus
have an adverse
effect on phone
performance.
“+”when
Purchase a car kit
to allow hand-free
Problem
Remedy
answer.
Consult
the local authorities
No Date and Your phone has
a
about
use
of
times standby battery powered
phones
driving.
while
by the main battery. If
the main battery is
removed, a full charged
standby battery could
stand up to seven hours.
Remove the battery
before your phone is
Switch
the phone
on Check if the connector is
in good condition. Install
the battery again and
make sure it is in good
contact with the phone.
Charge the battery to
full. Try again.
turned off may lead to
loss of information like
Date and time too.
You can not Check if call forward or
No display of This feature is Network
answer
incoming
calls
call barring is activated.
If yes, deactivate it.
Send ID
Settings
dependent.
Contact your service
provider.
The screen The SIM card may be
Not allowed Many
functions
are
prompts
SIM
error.
a
damaged. Contact your
to use
certain
function
Failure
send
a
Network Settings
dependent. Contact your
service provider.
card service provider.
The screen Contact your service
prompts and provider
IMSI
error
to Messages feature is not
a
available in all Network
Settings. Contact your
code
Messages
service
details.
provider
for
The screen Make sure your SIM
prompts you card is properly inserted.
You can not Remove the battery first.
to insert your If
problem
remains
SIM card
uncorrected, the SIM
card may be damaged.
Contact your service
provider.
Potentially explosive atmospheres
It is dangerous to use mobile phone in areas
exposed to explosion risks.
ⅥSafety and General Information
Exposure to RF Energy
Your phone contains a transmitter and a
receiver. When it is ON, it receives and
transmits radio frequency (RF) energy. The
transmission power of mobile phone can be
controlled with the GSM Network Settings.
Your phone is designed to comply with all
ꢁ
Turn your phone OFF when in any area
with a potentially explosive atmosphere,
such as gas station, oil tank and
chemical plant, etc, and when the air
contains metal ponder or grains, please
Switch off your mobile in those places.
Consult the local safety regulations first
if you are to use your mobile phone on a
vehicle loaded with explosives or
flammables (even when the ignition is
turned off) or on a vehicle powered by
LPG.
standards
and
guidelines
regarding
ꢁ
exposure of human beings to radio
frequency electromagnetic energy and
1999/5/EC
on
RF
equipment
and
communication terminals
Car
Consult the car manufacturer to ensure that
electronic equipment used on your car is
adequately shielded from electromagnetic
interference.
Efficient Operation
Efficient operation can improve your phone
performance, lower RF energy and energy
consumption.
Blasting Areas
ꢁ
For the sake of safety and optimum
performance, hold your phone properly
during a call, with the antenna above
your shoulder and earpiece close to
To avoid interfering with blasting operations,
turn your phone OFF when in a “blasting
area”. Obey all signs and instructions.
your ear.
appointed two batteries by the manufacturer,
their capacity are respective 900mAh and
1450mAh. The particular description as
following:
1. If the standard battery used on this
phone is a Li-ion 900mAh battery, with a
standby time is about 120-200 hours
and the connection time is about
150-220 minutes
2. If the Li-ion 1450mAh battery used on
your phone, its standby time is about
200-300 hours; and the calling time is
about 240-360 minutes.
Notes: The standby time and the speaking
time are made some difference based on
the network condition.
ꢁ
Avoid contact with antenna during a
call.
Do not use a phone the antenna of which is
damaged. Touching a damaged antenna
may cause slight burn. Ask a qualified
technician or to replace the antenna for you.
Use only genuine Haier parts.
Avoid using your phone in areas of a weak
signal, such as in tunnels or between
high-rises. In these cased, the signal
strength icon shows fewer bars than usual.
Using non-Haier accessories may void the
warranty. Haier is not responsible for
damaged caused by using non-Haier
accessories.
Use only Genuine Haier charging
accessories intended for specific phone
Use of other accessories will void the
warranty. The manufacturer of this phone is
not responsible for damages caused by
using non-original dealer accessories.
models.
Use
of
attachment
not
recommended by Haier may result dangers
and void the warranty.
Battery Use
ꢁ
Do not touch the two poles of battery
with metal (e.g. keys in your pocket) to
prevent damage and injury result from
This phone may allocation respectively
battery short circuit.
Compliance with Local Law and Regulation
Cell phones may cause interference. Laws
and regulations are passed with respect to
this. Please consult local authorities for law
information when purchasing a phone. If you
are to use your phone when traveling,
knowledge of relative laws and regulations
in the destination area or country is helpful.
Note: Strict laws and regulations are
imposed on use of phone when driving or on
board an aircraft.
ꢁ
ꢁ
Do not fold or disassemble the battery.
Do not throw the battery in fire or soak it
in water.
Responsibility
User’s Responsibility
Neglect may cause failure or injury. To avoid
that, please read carefully the following
safety precautions and keep people using
your phone informed of them.
To prevent any unauthorized use of your
phone:
Do not use your phone when you are in
areas or countries without GSM Network
Settings.
ꢁ
ꢁ
ꢁ
Make sure your phone is put in a safe
place and out of reach of children.
Keep your PIN code in mind; do not
write it down on pieces of paper.
Turn the phone off when it is not used
for a long time.
Use While Driving
It is dangerous to using a mobile phone
when driving, because when using a phone,
you cannot concentrate solely on driving.
Children
ꢁ
Give full attention to driving and to the
road. If possible, park your car before
using your phone,
Your cell phone is not a toy. Make sure your
phone is put in a safe place and out of reach
of children. Do not allow children to play with ꢁ Check the laws and regulations on the
your phone, it may cause injury or damage. use of phones in the area where you
drive. Always obey them.
Battery
ꢁ
ꢁ
ꢁ
Consult the car manufacturer to ensure
that electronic equipment used on your
car is adequately shielded from
electromagnetic interference.
: Indicating batteries should not
be mixed with domestic waste.
Packaging
You are recommended to use
a
hand-free car kit specially designed for
this purpose. Always give full attention
to driving and to the road.
The use of front light and horn as alert
of incoming calls are prohibited in some
countries. Check the laws and
regulations on the use of phones in the
area where you drive. Always obey
them.
ꢁ
: Indicating that the packaging
materials are recyclable.
ꢁ
:
Indicating that the plastic
materials are recyclable.
Adequate care and maintenance can ensure
you many years of trouble free operation.
Please keep your phone dry and clean.
Care and maintenance
Important
Environment protection
Local laws and regulations on disposal and
recycle of packaging materials, old batteries
and phones should be observed.
Standard symbols are designed for
appropriate disposal and recycle.
Your mobile is a product of high technology.
ꢁ
Do not leave the phone in a place of dirt
and heavy dust to prevent
contamination of detachable parts.
ꢁ
Do not store/use the phone at an
extremely high temperature that may be
harmful to electronic element and
battery, or cause distortion or
deformation of the plastic parts.
Do not attempt to repair the phone or its
accessories by yourself. You can dial
the hot line number of Haier when your
phone cannot be operated normally.
Always purchase and use Haier
batteries and chargers.
Protect the phone from dropping,
impact, and violent vibration.
Keep the phone and its accessories out
of reach of children.
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Keep the phone dry. Do not clean the
phone with chemical solvent or
detergent. Use a cotton cloth with water
or neutral soap solution to clean the
shell gently.
Version 3 Aug. 2005
Compliance: Q/02 HTX001-2005
ꢁ
Switch off the phone without delay if it
becomes wet. Remove the battery and
allow it to dry in the air. Inspect and
make sure whether the phone functions
properly.
|