JBL GTO17T User Manual

G R A N D  
T O U R IN G  
S E R IE S  
®
G T O 1 7 T  
t w e e t e r  
o w n e r ’s  
m a n u a l  
T H A N K Y O U  
for purchasing a JBL GTO17T automotive  
®
tweeter. Weve organized this manual to make  
your installation as simple and trouble-free  
as possible. Please read it thoroughly before  
proceeding. Remember to keep your sales  
receipt and this manual in a safe place so  
both are available for future reference.  
T W E E T E R IN S T A LLA T IO N  
S UR FA C E-M O UN T  
Figure 4. Surface-mounting the tweeter  
and connecting the crossover.  
Figures 7A through 7D. The Starfish™  
tweeter mount is intended to be used  
when the tweeter will be installed behind a  
factory grille (e.g., replacing the factory  
tweeter behind a door panel). The Starfish  
will allow you to mount the component  
tweeter directly to the panel itself or to the  
area behind the panel. The six mounting  
tabs can be removed easily to create a  
number of custom configurations.  
Figure 7B. Flush-mounted to surface  
behind grille panel.  
BLACK (–)  
(–) SMALL LUG  
BLACK  
RED (+)  
BLACK (–)  
RED (+)  
RED  
1
(+) LARGE LUG  
Note: Check screw clearance before  
2
installing. Use glue if clearance is an issue.  
Figure 7C. Mounted to grille panel.  
Note: Not all possible mounting  
configurations are shown.  
TW EETER A N G LE  
Figure 6. Aim the tweeter at the listening  
position by sliding the screw in the groove  
on the back of the tweeter cup and lock  
the tweeter in place using the small retain-  
ing screw. Rotate the entire assembly in  
the mounting surface and tighten the large  
hand nut.  
Figure 7A. Surface-mounted behind grille  
panel.  
FLUS H-M O UN T  
Figure 5. Mounting the tweeter using  
the I-Mount™ (patent no. 5,859,917)  
flush-mounting kit.  
3
3
ROTATE ENTIRE ASSEMBLY  
TO AIM ANGLED TWEETER  
TOWARD LISTENER.  
Figure 7D. In-dash location (may require  
gluing).  
1
1
SLIDE SCREW UP OR  
DOWN TO ADJUST  
TWEETER ANGLE.  
2
2
TIGHTEN SCREW TO  
LOCK ANGLE SETTINGS.  
4
SECURELY TIGHTEN  
THE LARGE HAND NUT.  
3
S P E C IF IC A T IO N S  
GTO17T  
1" Tweeter  
50W*  
Power Handling, RMS  
Power Handling, Peak  
Sensitivity (2.83V/1m)  
Frequency Response  
Impedance  
150W*  
92dB  
2.5kHz – 21kHz  
2 Ohms  
Mounting Depth  
3/4" (19mm)  
1-7/8" (48mm)  
Cutout Diameter  
* With enclosed filter  
General Care  
The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.  
A valid serial number is required for warranty coverage.  
Features, specications and appearance are subject to change without notice.  
Declaration of Conformity  
JBL Consumer Products  
250 Crossways Park Drive, Woodbury, NY 11797 USA  
516.255.4JBL (4525) (USA only) www.jbl.com  
We, Harman Consumer Group International  
2, route de Tours  
© 2005 Harman International Industries, Incorporated. All rights reserved.  
72500 Château du Loir  
France  
JBL, Harman International and Grand Touring Series are trademarks  
declare in own responsibility that the product described in this owners manual is in  
compliance with technical standards:  
of Harman International Industries, Incorporated, registered in the  
United States and/or other countries. I-Mount and Starfish are  
trademarks of Harman International Industries, Incorporated.  
EN 61000-6-3:2001  
EN 61000-6-1:2001  
Klaus Lebherz  
Harman Consumer Group International  
Château du Loir, France 11/05  
Part No. GTO17TOM11/05  
w w w . j b l . c o m  

Attwood 4622 User Manual
Audiovox Prestige P153B User Manual
Bazooka BA2150HC User Manual
DXG Technology Luxe Collection DXG 533V User Manual
Hamilton Beach 51101 User Manual
Hitachi DZ BX35A User Manual
JBL GTO603 User Manual
JVC Camcorder TK C700 User Manual
JVC Car Stereo System KD R312 User Manual
JVC GR AXM270 User Manual