COLOR VIDEO MONITOR
INSTRUCTIONS
TM-H1375SU
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
+
B
A
–
_ON
—OFF
UNDER
SCAN
Model No. :
Serial No.
TM-H1375SU
INPUT SELECT
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
POWER
TM-H1375SU
:
CONTENTS
SAFETY PRECAUTIONS ................................................................................. 2
CONTROLS AND FEATURES ......................................................................... 4
HOW TO HANDLE BASIC OPERATIONS ....................................................... 7
HOW TO USE THE MENU FUNCTIONS.......................................................... 8
HOW TO INITIALISE THE SETTING...............................................................11
BASIC CONNECTION EXAMPLE.................................................................. 12
TROUBLESHOOTING.................................................................................... 14
SPECIFICATIONS .......................................................................................... 15
3
CONTROLS AND FEATURES
FRONT VIEW
<Front Panel>
5
2
3
4
6
9
10
11
1
7
8
+
B
A
–
15
ON
OFF
UNDER
SCAN
INPUT SELECT
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
POWER
TM-H1375SU
12 13 14
–
+
B
A
ON
OFF
UNDER
SCAN
INPUT SELECT
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
POWER
TM-H1375SU
Input B (VIDEO / Y/C) button
[INPUT SELECT B]
Selects the video signal input to the VIDEO B terminal
and the audio signal input to the AUDIO B terminal on
the rear panel. When selected, the input B (VIDEO / Y/C)
indicator # lights.
1 Phase button [PHASE
]
8
Press this button to set the picture hue adjustment mode.
Adjust the value with the VOLUME/SELECT buttons.
Also used as a control button in the menu function mode.
2 Chroma button [CHROMA
]
Press this button to set the picture colour density
adjustment mode. Adjust the value with the VOLUME/
SELECT buttons. Also used as a control button in the
menu function mode.
Note:
* The VIDEO B terminals include a video terminal (BNC
connector) and a Y/C terminal (mini-DIN 4-pin
connector). The Y/C (S-video) terminal is given priority.
3
Brightness button [BRIGHT
]
Input A (VIDEO) button [INPUT SELECT A]
Selects the video signal input to the VIDEO A terminal
and the audio signal input to the AUDIO A terminal on the
rear panel. When selected, the input A (VIDEO) indicator
$ lights.
9
Press this button to adjust picture brightness. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
Contrast button [CONTRAST
]
4
5
6
Press this button to adjust picture contrast. Adjust the
value with the VOLUME/SELECT buttons. Also used as a
control button in the menu function mode.
Power indicator
Lights in green when the power is ON.
10
11
Lit
: When the power is on.
Unlit : When the power is off.
Menu button [MENU]
Displays and disappears the <MENU> screen.
Pressing the PHASE button with the Menu button
depressed will display the <SET-UP MENU> screen.
Power switch [POWER
]
Press this switch to turn the power on or off.
g ON : Power is turned on.
G OFF : Power is turned off.
Volume/Select buttons
[VOLUME/SELECT –
+]
12
13
UNDER SCAN indicator
Adjusts the speaker volume. Also used as a control
Lights in green when UNDER SCAN is selected.
button in the menu function mode.
Input B (VIDEO / Y/C) indicator
Lights in green when Input B (VIDEO / Y/C) is selected.
Under Scan button [UNDER SCAN]
Reduces the screen size to display the whole screen.
Press the button again to quit Under Scan.
7
14 Input A (VIDEO) indicator
Lights in green when Input A (VIDEO) is selected.
Speaker
15
A built-in speaker is located inside the right side panel
when the monitor is viewed from the front.
4
REAR VIEW
<Rear Panel>
VIDEO A
16
17
VIDEO A
IN
IN
OUT
IN
OUT
VIDEO B
VIDEO B
IN
IN
OUT
Y/C
OUT
IN
AUDIO A
OUT
OUT
AUDIO B
OUT
REMOTE
IN
INPUT
A/B
ASPECT
IN
Y/C
18
OUT
AUDIO A
19
20
22
OUT
IN
IN
AUDIO B
OUT
23
REMOTE
21
To AC outlet
(120 V AC, 50 Hz/60 Hz)
INPUT
A/B
ASPECT
Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
18 Video B (Y/C) terminals
16
[VIDEO B Y/C IN/OUT]
Y/C (S-Video) signal input (IN) and output (OUT)
terminals.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
The output terminal is bridge-connected.
IN
: Y/C-separated (S-video) signal input terminal
Notes:
OUT : Bridge-connected Y/C-separated (S-video) signal
* For corresponding audio signals, use the AUDIO A
terminals (.
output terminal
Notes:
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
* For corresponding audio signals, use the AUDIO B
terminals ).
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal is given priority.
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
17 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
IN
: Video signal input terminal
OUT : Bridge-connected video signal output terminal
Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal
corresponding to the VIDEO A terminals ^.
The output terminal is bridge-connected.
19
Notes:
* For corresponding audio signals, use the AUDIO B
terminals ).
* When both VIDEO B terminals are connected (input) at
the same time, the Y/C terminal is given priority.
* Also refer to BASIC CONNECTION EXAMPLE on
page 12.
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO A
terminal ^.
* Also refer to BASIC CONNECTION EXAMPLE
on page 12.
5
CONTROLS AND FEATURES (cont’d)
REAR VIEW
<Rear Panel>
VIDEO A
16
VIDEO A
IN
IN
OUT
IN
OUT
VIDEO B
VIDEO B
IN
IN
OUT
Y/C
17
18
OUT
IN
AUDIO A
OUT
OUT
AUDIO B
OUT
REMOTE
IN
INPUT
A/B
ASPECT
IN
Y/C
OUT
AUDIO A
19
20
22
OUT
IN
IN
AUDIO B
OUT
23
REMOTE
21
To AC outlet
(120 V AC, 50 Hz/60 Hz)
INPUT
A/B
ASPECT
AC inlet [AC IN]
22
23
Audio B terminals [AUDIO B IN/OUT]
Input (IN) and output (OUT) terminals for the audio
signals corresponding to the VIDEO B terminals & or
VIDEO B (Y/C) terminals *.
20
Power input connector. Connect the provided AC power
cord e to an AC outlet (120 V AC, 50 Hz/60 Hz).
Power cord
Connects the provided power cord (120 V AC, 50 Hz/
60 Hz) to the AC IN connector.
The output terminal is bridge-connected.
IN
: Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
* For corresponding video signals, use the VIDEO B
terminals & or VIDEO B (Y/C) terminals *.
* Also refer to BASIC CONNECTION EXAMPLE
on pages 12 and 13.
Remote terminals
21
[REMOTE INPUT A/B, ASPECT]
Remote terminals for external control. Selecting INPUT A
or INPUT B and the ASPECT RATIO is available via
external control. External control is set in the <SET-UP
MENU> screen.
To use external control, you must build a switch cable
and connect it to the REMOTE terminals.
External control switch
External control
Open circuit
(open)
Closed circuit
(short)
functions
ASPECT RATIO
INPUT A/B
4–3 (4:3)
INPUT A
16–9 (16:9)
INPUT B
Notes:
● Also refer to BASIC CONNECTION EXAMPLE on
pages 12 and 13.
6
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
STATUS indication
(NTSC or PAL)
1. Press the POWER switch to turn on the power.
NTSC
gON : Power turns ON. (Power indicator: lit)
GOFF : Power turns OFF. (Power indicator: unlit)
ON
OFF
POWER
2. Press the INPUT SELECT buttons to choose input.
Select video/audio signals input to terminals on the rear
panel. The selected INPUT SELECT indicator lights in green.
B
A
About the STATUS indication
INPUT
SELECT
button
Terminals on the rear panel
● With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the colour
system indication appears for about
3 seconds on the screen while NTSC
or PAL signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 8 for more information
about COLOR SYSTEM setting and
page 9 for more information about
STATUS indication setting.
Video signal input
Audio signal input
INPUT SELECT
1 Input A
(VIDEO)
VIDEO A terminal
AUDIO A terminal
Input B
(VIDEO /
Y/C)
2
VIDEO B terminal
AUDIO B terminal
VIDEO B (Y/C) terminal
* When both VIDEO B terminals are connected (input) at the same time, the
Y/C terminal is given priority.
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
00 ~ 50
–
+
Press this button to display the speaker volume level on the
screen.
VOLUME/SELECT
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating.
VOLUME
:
20
+
–
PICTURE ADJUSTMENT
1. Press select buttons corresponding to the item
you want to adjust.
–40 ~ +40
The item you select is displayed on the screen.
1 PHASE (
2 CHROMA (
3 BRIGHT (
)
: Phase control
: Chroma control
: Brightness control
)
PHASE CHROMA BRIGHT CONTRAST
)
4 CONTRAST ( ) : Contrast control
PHASE
:
00
2. Adjust with the VOLUME/SELECT buttons.
+
–
–
+
VOLUME/SELECT button
Items
Notes:
–
+
VOLUME/SELECT
● Phase control is effective only in the
NTSC color system mode.
PHASE
(Phase)
reddish
greenish
● Chroma control is not effective when
receiving B/W or when no signal is
input. (Except when a component
signal is input.)
● When CHROMA is adjusted to “–40,”
the picture becomes less colourful.
● “NO EFFECT” is displayed (for about
3 seconds) when your selected
function has no effect.
CHROMA
(Chroma)
lighter
darker
lower
deeper
brighter
higher
BRIGHT
(Brightness)
CONTRAST
(Contrast)
* Screen indication will disappear about 10 seconds after operating.
7
HOW TO USE THE MENU FUNCTIONS
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
<MENU> screen
You can set the following menu items.
Set them depending on your needs.
1
< MENU >
‰ SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
:
00
• SHARPNESS
• COLOR TEMP.
• COLOR SYSTEM
• ASPECT RATIO
: 6500
:
AUTO
: 4–3
3
4
2
1. Press the MENU button.
The <MENU> screen is displayed.
EXIT
* The screen automatically disappears when no operation is
performed after about 5 minutes.
MENU
2. Press the PHASE (
to select MENU items.
) or CHROMA (
) button
+
–
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
<Front panel buttons>
A selection mark (3) is put next to the selected item.
1 Selection mark (3): Indicates the
menu item you select.
2 Menu item: Menu items you can
select.
Front panel
button
Function
displayed
PHASE CHROMA
Contents
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
PHASE (
)
∞
5
Forward selection mark (3)
Reverse selection mark (3)
3 Setting display: Indicates the current
CHROMA (
)
settings (value).
4 Function display: The functions of
the front panel buttons (7 buttons on
the left) correspond to the function
displayed.
3. Press the VOLUME/SELECT buttons to set.
–
+
Function
Contents
displayed
Front panel
button
Function
displayed
Contents
∞
5
–
Forward the menu item.
Reverse the menu item.
VOLUME/SELECT
VOLUME/
SELECT (+)
+
3
–
Increase (to max. value)
Forward the setting value
Decrease (to min. value)
Reverse the setting value
Lower the adjustment
value. (to the minimum)
VOLUME/
SELECT (–)
2
+
Raise the adjustment
value. (to the maximum)
Menu items
Purpose
Setting range
3
2
Forward the setting value.
Reverse the setting value.
Exits the <MENU> screen.
00
+1
+39
+40
SHARPNESS
Picture sharpness
Color temperature of
white balance
9300
AUTO
6500
COLOR TEMP.
EXIT
NTSC
AUTO
PAL
COLOR
SYSTEM
Color system
Aspect ratio
Note:
ASPECT RATIO
4 – 3
16 – 9
● When the screen aspect ratio is set to
16 - 9 (16:9) in ASPECT RATIO, the
picture will be vertically reduced.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
Front panel
button
Function
displayed
Contents
MENU
Quit (or Release) the <MENU>
screen
MENU
EXIT
8
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
<SET-UP MENU> screen
You can set the following set-up menu items.
• H. POSITION
• V. POSITION
• WHITE BALANCE
• CONTROL LOCK
• STATUS DISPLAY
• INPUT REMOTE
• ASPECT REMOTE
1
<SET-UP MENU>
‰ H. POSITION
:
:
00
00
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
: OFF
: ON
: OFF
: OFF
Notes:
● Parameters for H. POSITION and V. POSITION can be set separately depending on
the video input (Input A (VIDEO) or Input B (VIDEO / Y/C)) selected by the input select
buttons on the front panel.
3
4
2
EXIT
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature
value.
+
–
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
<Front panel buttons>
1. While pressing the MENU button, press the
1 Selection mark (3): Indicates the
menu item you select.
PHASE (
) button.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
2 Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
PHASE
MENU
4 Function display: The functions of
the front panel buttons (7 buttons
on the left) correspond to the
function displayed.
2. Press the PHASE (
) or CHROMA (
) button
to select the desired menu item.
A selection mark (3) is put next to the selected item.
Function
Contents
displayed
Front panel
button
Function
displayed
PHASE CHROMA
Contents
∞
5
–
Forward the menu item.
Reverse the menu item.
H. POSITION
V. POSITION
PHASE (
CHROMA (
)
∞
5
Forward selection mark (3)
Reverse selection mark (3)
)
Lower the adjustment
value. (to the minimum)
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
+
Raise the adjustment
value. (to the maximum)
3
2
Forward the setting value.
Reverse the setting value.
Exit the <SET-UP MENU>
screen. (release)
EXIT
DRV
3. Press the VOLUME/SELECT buttons to set.
Selects DRV adjustment.
–
+
Front panel
button
Function
displayed
Contents
Selects CUT OFF
adjustment.
CUTO
VOLUME/SELECT
+
3
Increase (to max. value)
VOLUME/
SELECT (+)
R
G
B
Adjusts red signal level.
Adjusts green signal level.
Adjusts blue signal level.
Forward the setting value
Selects CUT OFF setting screen
Decrease (to min. value)
Reverse the setting value
Selects DRIVE setting screen
CUTO
–
VOLUME/
SELECT (–)
2
DRV
Turns the ON-SCREEN
display on or off. (This
function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
DISP
Notes:
● For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
● Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
9
HOW TO USE THE MENU
FUNCTIONS (cont’d)
Set-up menu items
Purpose
Settings
H. POSITION
Adjusts the horizontal position of
the screen (+ : Horizontal position
shifts to the right/–: Horizontal
position shifts to the left)
–05 –04 •••••• –01 00 +01 •••••• +04 +05
V. POSITION
Adjusts the vertical position on the
screen (+: Vertical position moves
down/–: Vertical position moves up)
–05 –04 •••••• –01 00 +01 •••••• +04 +05
WHITE BALANCE
Adjusts the white balance
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
DRIVE
R.DRIVE
B.DRIVE
Adjusts red level
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
–
20
–
20
–
20
–
20
–
20
–
–
–
–
–
–
–
–
–
–
19 • • • • •
19 • • • • •
19 • • • • •
19 • • • • •
19 • • • • •
01 00
01 00
01 00
01 00
01 00
01 • • • • •
01 • • • • •
01 • • • • •
01 • • • • •
01 • • • • •
19
19
19
19
19
20
20
20
20
20
Adjusts blue level
Adjusts red cut off
Adjusts green cut off
Adjusts blue cut off
CUT OFF R. CUT OFF
G. CUT OFF
B. CUT OFF
CONTROL LOCK
Sets the operation buttons on the
front panel to control lock mode
OFF
ON
ON
STATUS DISPLAY
INPUT REMOTE
ASPECT REMOTE
Sets the status display of the colour
system
OFF
A/B
ON
Sets external control of input
selection (INPUT A/B)
OFF
OFF
Sets external control of the aspect
ratio
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
Notes:
● When the CONTROL LOCK function is
set to ON, pressing operation buttons
on the front panel will display the
message “CONTROL LOCK ON!” on
the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
5. Press the MENU button to quit.
Front panel Function
Contents
button
displayed
● To turn off the CONTROL LOCK
function, while holding the MENU button
press the PHASE button. Then set the
CONTROL LOCK function to OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
MENU
Quit (or Release) the <MENU>
screen
MENU
EXIT
– Power Switch operation
– Volume control with the VOLUME/
SELECT buttons
– External control when INPUT
REMOTE or ASPECT REMOTE is
valid
– Display or disappear of the <SET-UP
MENU> screen.
● The STATUS DISPLAY function can be
set to display (ON) or not display (OFF)
the present colour system when the
power is turned on or the input signal is
changed. Refer to page 7 for more
information.
● When the INPUT REMOTE function is
valid (A/B), pressing the Input A or
Input B buttons will display the message
“REMOTE ON!” on the screen for about
3 seconds.
● The INPUT REMOTE function is valid
(A/B) after quitting the <SET-UP
MENU> screen.
10
HOW TO INITIALISE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
1. Press the Power ( ) switch to turn the power
“Yes”
“No”
then <CONTRAST>
then <+> or <–>
OFF (G).
ON
OFF
POWER
2. While pressing both MENU button and PHASE (
button, press the Power ( ) switch to turn the
)
Initial settings
Initialisation
(setting)
Functions (Items)
power ON (g).
The <SET-UP MENU> RESET screen is displayed.
SHARPNESS
00
* The screen automatically disappears when no operation
is performed after about 5 minutes.
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
6500
AUTO
4–3
ON
OFF
Note:
PHASE
MENU
POWER
H. POSITION
V. POSITION
WHITE BALANCE
00
00
● The <SET-UP MENU> RESET screen will not be
displayed if the MENU or PHASE buttons are pressed
for a very short time. Keep pressing them until the
display screen appears.
R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE
B. DRIVE
CONTROL LOCK OFF
STATUS DISPLAY ON
00
00
3. Setting
ⅷ Initialisation is required.
INPUT REMOTE
OFF
ASPECT REMOTE OFF
Press the CONTRAST ( ) button.
* Initialisation is completed, and the <SET-UP MENU>
RESET screen disappears.
PHASE
00
00
00
00
CONTRAST
CHROMA
CONTRAST
BRIGHT
ⅷ Initialisation is not required.
VOLUME
20
Press the VOLUME/SELECT [+] or [–] button.
* Initialisation is aborted, and the <SET-UP MENU>
RESET screen disappears.
–
+
VOLUME/SELECT
11
BASIC CONNECTION EXAMPLE
Notes:
• Before connecting your system, make sure that all units are turned off.
• The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected.
Be sure to refer to the instructions provided with the unit(s) you are connecting.
• Each pair of input (IN) and output (OUT) terminals are bridge-connected.
• If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT)
terminal as this will cause the terminating resistance switch to open (auto terminate function).
• When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video
signal “looping” between the VCRs, and is not a malfunction.)
• Select the video input (INPUT A (VIDEO) or INPUT B (VIDEO / Y/C)) with the INPUT SELECT buttons on the front panel. When both VIDEO B
terminals are connected (input) at the same time, the Y/C terminal is given priority.
• The ASPECT RATIO or INPUT A/B settings can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE in the
<SET-UP MENU> screen to valid. (Refer to pages 9 and 10.)
Ⅵ VIDEO A Connection Example (Select Input A (VIDEO))
VIDEO A
Video
Video
(Video signal cable)
(Video signal cable)
IN
IN
OUT
Video Camera
VIDEO B
Video
(Video signal cable)
OUT
VCR
IN
Video Monitor
Audio
Y/C
(Audio signal cable)
OUT
AUDIO A
Audio
VCR
(Audio signal cable)
OUT
IN
IN
Video Monitor
AUDIO B
Audio
(Audio signal cable)
OUT
Ⅵ VIDEO B (VIDEO) Connection
REMOTE
Example (Select Input B (VIDEO))
INPUT
A/B
ASPECT
Video
Video Camera
(Video signal cable)
VCR
Video Monitor
Audio
(Audio signal cable)
Video Monitor
VCR
External control switch
External control switch
REMOTE
REMOTE
open circuit (open)
open circuit (open)
(Remote cable)
RCA pin
(Remote cable)
RCA pin
closed circuit (short)
closed circuit (short)
External control switch
External control
External control switch
External control
functions
Open circuit Closed circuit
Open circuit Closed circuit
functions
(open)
(short)
(open)
(short)
INPUT A/B
INPUT A
INPUT B
ASPECT RATIO
4–3 (4:3)
16–9 (16:9)
: Signal Flow
12
Ⅵ VIDEO B (Y/C) Connection Example (Select Input B (Y/C))
VIDEO A
IN
IN
OUT
VIDEO B
Video Camera
OUT
Y/C (S-video)
VCR
(Y/C (S-video) signal cable)
IN
Y/C
Video Monitor
Y/C (S-video)
(Y/C (S-video) signal cable)
OUT
AUDIO A
OUT
IN
IN
Video Monitor
AUDIO B
VCR
Audio
Audio
(Audio signal cable)
(Audio signal cable)
OUT
REMOTE
INPUT
A/B
ASPECT
External control switch
REMOTE
open circuit (open)
(Remote cable)
RCA pin
closed circuit (short)
External control switch
External control
functions
Open circuit Closed circuit
(open)
(short)
: Signal Flow
ASPECT RATIO
4–3 (4:3)
16–9 (16:9)
13
TROUBLESHOOTING
Solutions to common problems related to your monitor are described here. If none of the solutions presented here
solves the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance.
Problems
Points to be checked
Measures (Remedy)
Firmly insert the power plug.
No power supply.
Is the power plug loosened or disconnected?
No picture with the
power on.
Is the video signal output from the connected
component?
Set the connected component correctly.
Is the input signal selected properly?
Select the required video signal input with the
Input select button. (See page 7.)
Is the video cable disconnected?
Connect the video signal cable firmly.
(See pages 12 and 13.)
No sound.
Is the audio signal output from the connected
component?
Set the connected component correctly.
Is the volume output set to minimum?
Adjust the speaker volume with the VOLUME/
SELECT button. (See page 7.)
Is the audio cable disconnected?
Connect the audio signal cable firmly.
(See pages 12 and 13.)
Shaking picture.
Is the monitor close to a device generating a
strong magnetic field?
Move the device away from the monitor until the
picture stabilises.
No colors, wrong
color, or dark
picture.
Is the color system selected properly?
Set COLOR SYSTEM in the <MENU> screen to
AUTO. (See page 8.)
Has the picture control setting (CONTRAST,
BRIGHT, CHROMA or PHASE) been changed?
Set each picture control to the standard setting.
(See page 7.)
Unnatural, irregularly
colored, or distorted
picture.
Is the monitor close to a speaker, magnet or any Move the device away from the monitor and turn
other device generating a strong magnetic field? the monitor’s power off. Wait at least 30 minutes,
then turn the power on again.
Dark stripes appear
at the top and bottom
of the screen, picture
vertically squeezed.
Is the aspect ratio set to 16:9?
Set ASPECT RATIO in the <MENU> screen to
[4 : 3 (4 – 3)]. (See page 8.)
When controlling externally, ASPECT RATIO
should be set to [4 : 3 (4 – 3)].
(See pages 12 and 13.)
The overall picture
size is too small.
Has the UNDER SCAN button been pressed so
the UNDER SCAN indicator lights?
Press the UNDER SCAN button to turn off the
indicator. (See page 4.)
Function buttons on
Has control of the buttons been locked? (Has
Set CONTROL LOCK in the <SET-UP MENU>
the front panel do not the CONTROL LOCK function been set to ON?) screen to OFF. (See pages 9 and 10.)
function.
The INPUT SELECT
buttons do not
function.
Is input selection under external control? (Has
the INPUT REMOTE function been set to valid
(A/B)?)
Set INPUT REMOTE in the <SET-UP MENU>
screen to OFF. (See pages 9 and 10.)
The following are not malfunctions:
● When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be colored. This is due to the
structure of the cathode ray tube and will be deleted when another image is displayed.
● You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static
electricity on the CRT and is not harmful.
● The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality
appears on the screen as well.
● If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to
mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn
the power off on any monitor that is not being used.
14
SPECIFICATIONS
Ⅲ Audio power output
Ⅲ Built-in speaker
: 1 W (monaural)
: 3-1/8” (8 cm) round x 1
impedance of 8 Ω
Ⅲ Type
: Color video monitor
: NTSC (3.58), PAL
Ⅲ Color system
Ⅲ Picture tube
: 13” measured diagonally,
90° deflection, in-line gun,
trio-dot type (phosphor dot-trio
pitch 0.28 mm)
Ⅲ Environmental
conditions
: Operation temperature:
0 °C – 40 °C
Operation humidity:
Ⅲ Effective screen size
Ⅲ Scanning frequency
: Width
Height
Diagonal 13-1/4”(335.4 mm)
: (H) 15.734 kHz (NTSC)
15.625 kHz (PAL)
11-1/8”(280.8 mm)
8-3/8” (210.6 mm)
20 % – 80 % (non-condensing)
: 120 V AC, 50 Hz/ 60 Hz
: 1.1 A (120 V AC)
: Width 13-5/8”(346 mm)
Height 12-1/4”(310 mm)
Depth 14-7/8”(375 mm)
: 29.5 lbs (13.4 kg)
Ⅲ Power requirements
Ⅲ Power consumption
Ⅲ Dimensions
(V) 59.94 Hz (NTSC)
50 Hz (PAL)
Ⅲ Weight
Ⅲ Accessory
Ⅲ Horizontal resolution : 750 TV lines or more
(Y/C input mode)
: AC power cord [7.9ft (2.4m)] x 1
Ⅲ Input terminals
VIDEO A : Composite video:
1 line, BNC connector x 2,
1 V(p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
VIDEO B : Composite video:
1 line, BNC connector x 2,
1 V(p-p), 75 Ω, negative sync
(bridge connection possible,
auto termination)
Y/C-separated:
1 line, mini-DIN 4-pin
ⅥY/C (Mini DIN 4 pin) terminal
connector x 2
Y: 1.0 V(p-p), 75 Ω
specification
C (BURST): 0.286 V(p-p),
75 Ω (NTSC)
0.3 V(p-p), 75 Ω (PAL)
2
4
Pin No.
Signal
GND (Y)
GND (C)
Y
(bridge connection possible,
auto termination)
IN
1
2
3
4
1
2
3
Y/C
AUDIO A : 1 line (monaural), RCA pin x 2
0.5 V(rms), high-impedance
(bridge connection possible)
AUDIO B : 1 line (monaural), RCA pin x 2
0.5 V(rms), high-impedance
(bridge connection possible)
4
OUT
C
1
3
REMOTE INPUT A/B : 1 line, RCA pin x 1
REMOTE ASPECT : 1 line, RCA pin x 1
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.
* Dimensions and weight are approximate.
* E. & O. E. Design and specifications subject to change without notice.
15
SPECIFICATIONS (cont’d)
Ⅵ Dimensions
Unit : inch (mm)
< Side View >
< Front View >
14-7/8 (375)
13-5/8 (346)
14-3/8 (363.5)
1/16 (1.5)
*
*
11-3/8 (287)
–
+
B
A
_ON
—OFF
UNDER
SCAN
INPUT SELECT
PHASE
CHROMA
BRIGHT
CONTRAST
MENU
VOLUME/SELECT
POWER
TM-H1375SU
2-5/8
(63.7)
11-1/4 (284)
10-3/4 (273)
* Asterisks ( ) are used to indicate front panel
*
dimensions.
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
1700 Vallery Road Wayne, NJ07470
JVC CANADA INC.
21 Finchdene Square, Scarborough Ontario M1X 1A7
Printed in Thailand
LCT0923-001A-H
1000-K-V-JMT
2000 VICTOR COMPANY OF JAPAN, LIMITED
©
|